Camburg lower control arms with extra external bypass

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ntm

Full Access Member
Joined
Sep 11, 2011
Posts
886
Reaction score
943
Location
Alberta, Canada
Where are you guys at on these ?
What external bypass are the lca's designed to work with ?
Have you done any tuning with them yet ?
Are you running the stock coilovers with them, or a revalved 3.0 ?

I'm currently running fox 3.0 fronts, icon 3.0 rears, and want more...
 

Sales_@_Camburg

Full Access Member
Joined
Oct 31, 2013
Posts
70
Reaction score
109
Location
Huntington Beach, CA
We've shipped quite a few of these arms out so far, I know SDHQ has been putting in some big orders on this stuff so I would check with them for inventory, etc. I know they are also working with Icon to develop the bypass shock to go with their 3.0 coilovers.

In-house we developed a specific FOX 3-tube bypass shock to be used with these arms. Bypass tube location, size, piston and valving were all unique and designed around using it with a FOX internal bypass coilover, with the factory version or their upgraded 3.0 version. We prefer to use the 3.0 version since you gain wheel travel over the stock coilover and aid control.

We're working on getting some more photos, videos, etc of the parts in action. This time of year is just really busy with SEMA, Offroad Expo, racing, etc.

- Camburg Engineering
 
OP
OP
ntm

ntm

Full Access Member
Joined
Sep 11, 2011
Posts
886
Reaction score
943
Location
Alberta, Canada
We've shipped quite a few of these arms out so far, I know SDHQ has been putting in some big orders on this stuff so I would check with them for inventory, etc. I know they are also working with Icon to develop the bypass shock to go with their 3.0 coilovers.

In-house we developed a specific FOX 3-tube bypass shock to be used with these arms. Bypass tube location, size, piston and valving were all unique and designed around using it with a FOX internal bypass coilover, with the factory version or their upgraded 3.0 version. We prefer to use the 3.0 version since you gain wheel travel over the stock coilover and aid control.

We're working on getting some more photos, videos, etc of the parts in action. This time of year is just really busy with SEMA, Offroad Expo, racing, etc.

- Camburg Engineering


I appreciate the reply.
The icons aren't really an option for me, I tried their 3.0 coilover and was unimpressed with their daily driver manners.
The fox external bypasses you had built for your shop rig, are they something that can be obtained by us mere mortals, or were they a one off ?
 
OP
OP
ntm

ntm

Full Access Member
Joined
Sep 11, 2011
Posts
886
Reaction score
943
Location
Alberta, Canada
It's a custom shock we will have available for our lower arms. We have more of them on order with FOX right now.

Very nice, thanks for your time !


P.S.- Any plans at this time for a front long travel kit and/or rear sprung under kit for the raptor, similar to your offerings for the tundra ?
 
Last edited:
Top