HYBRID Method NV and DS Wheels

[FishingBen]

You're kidding me? Somewhere there is a source for the one piece stainless that could be painted black. There Has to be!

 

[Raptor911]

If you find a source then let us know.

You're kidding me? Somewhere there is a source for the one piece stainless that could be painted black. There Has to be!

 

[Raptor911]

I think stainless behind black bolts would look funny. These would work better >> 100 Pack of M8 Plastic Nylon Washers Black | eBay

Now I just need to order 100 M8 stainless washers to go behind them!

 

[J DAMAGE]

Guy's try McMaster-carr, or MSC,

 

[Raptor911]

I have already tried them all. No one makes a 6mm lenght bolt. And they told me anyone needing a 6mm lenght bolt needs to special order them from a machine shop, which will be very expensive.

Guy's try McMaster-carr, or MSC,

 

[MotuMute]

Sucks, but if you want the stainless look - might just have to bite the bullet and order the one-piece bolt from Method. 24 x 4 wheels = $120. Pricey but damn I get a lot of nice comments on them.



Or.... What about vice grips and a grinding wheel. Probably take 30 seconds per bolt???

 

[XTRUCK]

I decided to not grind mine down, but remove and paint the original bolts.

 

[Big Blue]

Stay tuned...

I will have pics early next week of the Black plastic amazon bolts with stainless washers.

I think my stock bolts are too far gone with corrosion to repaint them.

Chicago winters (ie Road Salt) are a Bitch!

If I dont like the black plastic ones, I will go the Mute replacement route with Method.

 

[BIRDMAN]

Wait don't the bolts hold the ring on? How strong are the nylon bolts? and the amazon bolts are 6mm right why do you need washers?

---------- Post added at 10:14 PM ---------- Previous post was at 10:13 PM ----------

Or you could passivate the stainless bolts

 

[Raptor911]

The ring is fake and part of the wheel. I thought you have the NVs? The bolts are purely cosmetic and serves no purpose. You could remove all of them and nothing would happen.

Wait don't the bolts hold the ring on? How strong are the nylon bolts? and the amazon bolts are 6mm right why do you need washers?

---------- Post added at 10:14 PM ---------- Previous post was at 10:13 PM ----------

Or you could passivate the stainless bolts