What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NateMob

Full Access Member
Joined
Sep 15, 2021
Posts
399
Reaction score
477
Location
SATX
Left side harness was a pita but overall was an hour job start finish incl test drive. No more stiffness and my eclik can do its magic. Put some dielectric grease on em before i put them back on, lots of crap in the shock i had to clean out
View attachment 382680
Were you able to order the solenoids on their own? If so could you please post the part number(s)? Thank you!
 

k3k0a808

Member
Joined
Oct 9, 2022
Posts
18
Reaction score
64
Location
Hawaii
Had the offroam mount but didnt really like it, and it damaged the finish on the plastic... mounted a ball straight to the right panel and while i had everything apart i re-painted all the easily scratch-able grey in the truck. I liked the contrast so i redid it in the same color, (Montana Metallic Graphite is a very close match) added holographic flake in there, and topped it off with 2k Matte Clearcoat. (Hard to see the flake, it looks better in the sun)IMG_2153.jpegIMG_2154.jpegIMG_2155.jpegIMG_2156.jpeg
 

Space Ghost

Full Access Member
Joined
Apr 1, 2022
Posts
838
Reaction score
1,458
Location
FL
Were you able to order the solenoids on their own? If so could you please post the part number(s)? Thank you!
each side has a different part #, there were for the rear
KL3Z*18B084*D SOLENOID ASY
KL3Z*18B084*C SOLENOID ASY

Sorry didnt see this till now, i will have to check the boxes when i get home as on them they mentioned which side they go on.
 
Top