Baja Designs LP4 A-Pillar, and S2 Sport Reverse Kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

heyitsfish

FRF Supporting Member
Supporting Member
Joined
Jul 26, 2021
Posts
27
Reaction score
59
Location
Peoria, AZ
What are the IPT covers? Made by BD?
I think IPT refers to the smaller side LEDs on the LP4. BD makes a set of blinders that stick on with double sided tape or SDHQ makes a set that bolts on using the existing hardware. I got a set from SDHQ as they are local and I liked the idea of not relying on double sided tape, especially in AZ heat although I am sure it is fine.

 

kpecks

Full Access Member
Joined
Aug 7, 2019
Posts
376
Reaction score
486
Location
Florida
I think IPT refers to the smaller side LEDs on the LP4. BD makes a set of blinders that stick on with double sided tape or SDHQ makes a set that bolts on using the existing hardware. I got a set from SDHQ as they are local and I liked the idea of not relying on double sided tape, especially in AZ heat although I am sure it is fine.

Oh ya. You will DEFINITELY need to get these... i just ordered a set. Will make a massive difference.
 

4wheelinAZ

Full Access Member
Joined
Aug 12, 2021
Posts
801
Reaction score
996
Location
AZ
They don’t look way too big but they are big. They can slightly block your view when looking left but you get used to it.
You think this is a good light bar substitute? I just don’t really want to do a behind the grille setup
 
Top