Husky Wheel Well Liner Install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SMIKE

Member
Joined
Jan 6, 2022
Posts
41
Reaction score
108
Location
Riverside CA
Got my wheel well liners installed today.

Pretty easy, about 10 min per side and you only need a ratchet with 7mm and 10mm sockets.

They can be ordered here for $129.99. Placed the order Wed and they showed up on Sunday.


Before:
1660529793208.png

Remove the seven screws holding the fender on (7mm socket)

1660529861225.png
1660529869286.png
1660529876170.png
1660529883567.png
 
OP
OP
SMIKE

SMIKE

Member
Joined
Jan 6, 2022
Posts
41
Reaction score
108
Location
Riverside CA
1660530058296.png

Next insert the fender liner into the wheel well. The cutout goes behind the shock. It will take a bit of massaging but goes in pretty easy.

After that you will want to slide the front/outer edge between the body and the stock plastic fender that you unbolted. Work your way around until it is completely inserted.

1660530226925.png

Then take the 10mm bolts provided and adjust the fender liner until the holes line up with the clips that you put on the body seams.

1660530237510.png
1660530247554.png
1660530276647.png
 

jjws1968

Active Member
Joined
Nov 9, 2021
Posts
60
Reaction score
67
Location
Michigan
Should have just spent a few more bucks and had them professionally line-x’d. Much cleaner and long lasting if u can find a guy that cares to do it. I could not be happier.
 

Attachments

  • B6E1BAD1-282E-4A54-9411-E8C2814B8CF0.jpeg
    B6E1BAD1-282E-4A54-9411-E8C2814B8CF0.jpeg
    167 KB · Views: 437
  • A93F4928-116D-4960-8BEC-56B0E3149FDF.jpeg
    A93F4928-116D-4960-8BEC-56B0E3149FDF.jpeg
    182.1 KB · Views: 431
  • 45950384-D0FE-47DB-99C1-DFDBE729B2E7.jpeg
    45950384-D0FE-47DB-99C1-DFDBE729B2E7.jpeg
    195.5 KB · Views: 415
  • 7325E6CC-9C9E-4913-8D7E-8D22ACE74907.jpeg
    7325E6CC-9C9E-4913-8D7E-8D22ACE74907.jpeg
    190.7 KB · Views: 426

4DPWR

Member
Joined
Jun 24, 2022
Posts
44
Reaction score
61
Location
L0R1Y0
Looks great. I have tried to order them but it appears they will not ship to Canada. GRRRRRR
 

Swacer_2

Full Access Member
Joined
Aug 3, 2022
Posts
210
Reaction score
154
Location
PA
Should have just spent a few more bucks and had them professionally line-x’d. Much cleaner and long lasting if u can find a guy that cares to do it. I could not be happier.

In the installation post that you were replying to, I was a little curious how the husky liner didn't seem to cover the painted area at the bottom corners of the fender. I was looking at your photos, and it looks like your line-x person didn't coat that area either (the horizontal area at the very bottom of the fender. Is that true?
 
Top