BD LP4 Pro installed on a-pillar

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
4,451
Reaction score
6,172
Location
NY
@4x4TruckLEDs.com

Please take a look and see if you agree with @jm77

Anyone else wish to chime in please do. I’m not very attuned to this but it looks to me like mine is as u show. Not arguing. I just may be dumb.
 

jm77

Full Access Member
Joined
Aug 31, 2021
Posts
328
Reaction score
279
Location
USA
@4x4TruckLEDs.com

Please take a look and see if you agree with @jm77

Anyone else wish to chime in please do. I’m not very attuned to this but it looks to me like mine is as u show. Not arguing. I just may be dumb.
No arguing either, just trying to help. Take a look at this picture again. I drew a red arrow to the bracket. It’s on the opposite side of the wing that the light mounts to. Should have my truck back tomorrow, I can take a picture of mine too.
 

Attachments

  • 6FDC11A3-860E-44FB-8995-56EB48126E19.jpeg
    6FDC11A3-860E-44FB-8995-56EB48126E19.jpeg
    54.7 KB · Views: 22

Zach Gen3

Active Member
Joined
Dec 9, 2021
Posts
50
Reaction score
10
Location
Houston, TX
@4x4TruckLEDs.com

Please take a look and see if you agree with @jm77

Anyone else wish to chime in please do. I’m not very attuned to this but it looks to me like mine is as u show. Not arguing. I just may be dumb.
Your support L bracket is between the light mount and the fender - It is supposed to be between the plastic cowl and the light mount. I am also running LP4's on SDHQ mounts, and what post #66 has pictured is correct.
 

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
4,451
Reaction score
6,172
Location
NY
Your support L bracket is between the light mount and the fender - It is supposed to be between the plastic cowl and the light mount. I am also running LP4's on SDHQ mounts, and what post #66 has pictured is correct.
I appreciate that. My major concern originally was it was up against the fender edge. There is now a quarter inch gap or so.

So I ask, and I mean respectfully, does it matter? it looks to me as if the bracket you are showing may be slightly different than mine. But I’m usually wrong. (Just don’t tell my wife. I tell her I’m always right. Lol)
 

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
4,451
Reaction score
6,172
Location
NY
No arguing either, just trying to help. Take a look at this picture again. I drew a red arrow to the bracket. It’s on the opposite side of the wing that the light mounts to. Should have my truck back tomorrow, I can take a picture of mine too.
Also one thing really confusing is the words in stock are backward on your pic, meaning it may be a reverse mirror image? I’m really confused.
 

Zach Gen3

Active Member
Joined
Dec 9, 2021
Posts
50
Reaction score
10
Location
Houston, TX
I appreciate that. My major concern originally was it was up against the fender edge. There is now a quarter inch gap or so.

So I ask, and I mean respectfully, does it matter? it looks to me as if the bracket you are showing may be slightly different than mine. But I’m usually wrong. (Just don’t tell my wife. I tell her I’m always right. Lol)
No problem. Ill try to get an up close picture later this afternoon. Whether it matters or not, I'm not sure. If anything it just more contact with your fender as opposed to the plastic cowl, but if you don't mind that, it is probably fine. It is likely the same bracket since there is only 1 sdhq mount that fits to my knowledge, but I could be wrong on that.
 
Top