New member 2022 Raptor rear suspension problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
semaj

semaj

Member
Joined
Jun 18, 2022
Posts
30
Reaction score
21
Location
Nevada
Yes sir, I really think so as well…
I do have a question. Does an know what the size of the diff bolts are. I can’t seem to find a clear answer. My new diff cover is about 3/8 or so thicker than the stock. Thanks
 

Nex

RIP CoronaRaptor
Joined
Sep 2, 2021
Posts
7,659
Reaction score
21,022
Location
Washington State
Yes sir, I really think so as well…
I do have a question. Does an know what the size of the diff bolts are. I can’t seem to find a clear answer. My new diff cover is about 3/8 or so thicker than the stock. Thanks

When you take the old cover off, stick the bolts in the new cover. Check pin length.
 
OP
OP
semaj

semaj

Member
Joined
Jun 18, 2022
Posts
30
Reaction score
21
Location
Nevada
Thanks, I did do that and they are to short. I wanted to order some new stainless steel Allen style bolts, but I am not sure the bolt size and thread info.
 

Jakenbake

FRF Addict
Joined
Sep 20, 2017
Posts
1,792
Reaction score
2,448
Can also measure diameter and then count the treads per a known length. Metric is center to center of threads and sae is listed as threads per inch. They are basically inverses of each other.

They also tools to check the thread pitch. Pretty handy
 
OP
OP
semaj

semaj

Member
Joined
Jun 18, 2022
Posts
30
Reaction score
21
Location
Nevada
Ok, I will do that. I will also look at getting the tool to check the thread and bolt size. Thanks for the help.
 
Top