Morimoto Announces NEW 2nd Gen XB Headlights for Gen2 Raptors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WoahItsRob

Full Access Member
Joined
Sep 16, 2020
Posts
172
Reaction score
116
Location
Virginia
I did, used yours for reference. Mine is 2020 as well.
Harness is hooked up to the blue wire in the headlights? Followed the 4x4truckleds YouTube instructional video for removing the 2 or 3 black drivers?

Sent from my SM-N986U using Tapatalk
 

Ducc

Full Access Member
Joined
Mar 5, 2020
Posts
103
Reaction score
92
Location
Arizona
Harness is hooked up to the blue wire in the headlights? Followed the 4x4truckleds YouTube instructional video for removing the 2 or 3 black drivers?

Sent from my SM-N986U using Tapatalk

Yessir. Removed all of the halogen resistor packs and even attached the yellow shrink one that shipped separately. After connecting everything I only had two plugs left and only the blue one mated up with the DRL harness. Maybe a faulty connection with the micro fuse tap but I highly doubt it.
 

WoahItsRob

Full Access Member
Joined
Sep 16, 2020
Posts
172
Reaction score
116
Location
Virginia
Yessir. Removed all of the halogen resistor packs and even attached the yellow shrink one that shipped separately. After connecting everything I only had two plugs left and only the blue one mated up with the DRL harness. Maybe a faulty connection with the micro fuse tap but I highly doubt it.
Yeah that's weird.. have you checked the fuses to see if they are good still? Could of accidentally overpowered it during install and testing? It's the only other thing I could think of as the issue

Sent from my SM-N986U using Tapatalk
 

Ducc

Full Access Member
Joined
Mar 5, 2020
Posts
103
Reaction score
92
Location
Arizona
Yeah that's weird.. have you checked the fuses to see if they are good still? Could of accidentally overpowered it during install and testing? It's the only other thing I could think of as the issue

Sent from my SM-N986U using Tapatalk

Appreciate your help troubleshooting.

Question...

Did you receive the incorrect, mini fuse tap initially and then crimp on the proper fitting micro tap? Or did you receive the correct one from the get go?
 

WoahItsRob

Full Access Member
Joined
Sep 16, 2020
Posts
172
Reaction score
116
Location
Virginia
Appreciate your help troubleshooting.

Question...

Did you receive the incorrect, mini fuse tap initially and then crimp on the proper fitting micro tap? Or did you receive the correct one from the get go?
I received the wrong one, and they sent me a new one in the mail that I'm still waiting on. I didn't feel like waiting so I bought a new one at advance auto and crimped it on.
I'll be using the fuse tap they have shipping for my light bar backlighting

Sent from my SM-N986U using Tapatalk
 

Ducc

Full Access Member
Joined
Mar 5, 2020
Posts
103
Reaction score
92
Location
Arizona
I received the wrong one, and they sent me a new one in the mail that I'm still waiting on. I didn't feel like waiting so I bought a new one at advance auto and crimped it on.
I'll be using the fuse tap they have shipping for my light bar backlighting

Sent from my SM-N986U using Tapatalk

OK, same thing I did. Well there goes that theory. Hell we even connected the wires directly and covered in electrical tape to remove the crimp from the equation. Oh well, Bugatti would be cool but I'm just happy I don't have anything really off or hyperflash. Now I just need to adjust the angle. Out of the box they were low but I over corrected and they're waaay too high
 

WoahItsRob

Full Access Member
Joined
Sep 16, 2020
Posts
172
Reaction score
116
Location
Virginia
OK, same thing I did. Well there goes that theory. Hell we even connected the wires directly and covered in electrical tape to remove the crimp from the equation. Oh well, Bugatti would be cool but I'm just happy I don't have anything really off or hyperflash. Now I just need to adjust the angle. Out of the box they were low but I over corrected and they're waaay too high
Yeah man, that sucks it doesn't work. DM the company you got it from and they can troubleshoot better or send you something new

Sent from my SM-N986U using Tapatalk
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Here ya go, this might help explain the harness a bit more. Updated video:


And yes, I already fixed the broken clip (don't do that one handed lol). Just replaced the entire clip with one from a used set we had laying around for testing purposes.
 
Last edited:
Top