Front lighting for frame cut bumper?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,273
Reaction score
996
Location
Des Moines, IA
Looking for suggestions for front lighting for a frame cut bumper. I've got the Morimoto XB headlights and a 40" Rigid light bar mounted behind the grille so far. Thinking I could maybe use some amber "fog" lights mounted to the tube bumper to give me some more driving light rather than just off road. The 40" Rigid bar seems to provide plenty of light for off road driving, but I wouldn't mind actual fog lights. What are you guys using?
 

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
If you want street legal fogs, go with the Baja Designs SAE. They are not the brightest because they are acting as FOG lights, but they are street legal.

Or if you have room for 2 sets of lights, do a set of SAE and then a set of Squdaron Pros in DC. This gives you street legal fogs and then lights you can use when you are alone (sort of like high beams) without having to turn on the 40" bar

We have plenty in stock at our website
 

D3 SS 3D

Full Access Member
Joined
Aug 7, 2019
Posts
231
Reaction score
323
Location
Texas
Most of the frame cuts I’ve seen, minus a small few, have either cut outs / slots for lights or add ons that let you run additional lights.
 
OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,273
Reaction score
996
Location
Des Moines, IA
Most of the frame cuts I’ve seen, minus a small few, have either cut outs / slots for lights or add ons that let you run additional lights.

I was just curious because I know I can obviously drill through the tube and mount lights or I can probably get ones that would clamp on, but I wanted to see some setups on other Raptors. Mine is just a straight tube across the valance, so it doesn't have a light mounting bar or anything like that.
 

JefeAZ

Full Access Member
Joined
Oct 28, 2014
Posts
433
Reaction score
789
Location
Tucson
Love the Baja Squadron Sports. Not street legal though. I had Evil MFG add brackets to the Hellion bumper

img_20201126_182008-jpg.157091


img_20201126_164535-jpg.157090
 
OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,273
Reaction score
996
Location
Des Moines, IA
Love the Baja Squadron Sports. Not street legal though. I had Evil MFG add brackets to the Hellion bumper

img_20201126_182008-jpg.157091


img_20201126_164535-jpg.157090

Yea, I'm thinking of just going that route with mine. I'm really just looking for fogs since I've already got a 40" Rigid light bar behind the grille along with the Morimoto XB headlights.
 

PorterW1111

FRF Addict
Joined
Apr 19, 2020
Posts
1,448
Reaction score
2,038
Location
Florida
Fogs under the tube. I welded on some trick tabs vs drilling a hole in the tube. Mine technically aren’t street legal. But I just pointed them at the ground more and I haven’t been pulled over.

Ambers are way more fun than white lights lol

9B794767-7CCC-4941-81B3-012C7DA7E0DF.jpeg
 
OP
OP
C

Cody Templeton

FRF Addict
Joined
Oct 29, 2020
Posts
1,273
Reaction score
996
Location
Des Moines, IA
Fogs under the tube. I welded on some trick tabs vs drilling a hole in the tube. Mine technically aren’t street legal. But I just pointed them at the ground more and I haven’t been pulled over.

Ambers are way more fun than white lights lol

View attachment 157217

I'll probably just end up doing mine in similar fashion since the bumper I have is the same as yours, just that the bar goes all the way to the ends of the valance. I'll probably just do white as well, I've already got plenty of white lighting from the 40" Rigid bar behind the grille. Just looking for some "driving" lights that point lower and don't blind everyone.
 

PorterW1111

FRF Addict
Joined
Apr 19, 2020
Posts
1,448
Reaction score
2,038
Location
Florida
I'll probably just end up doing mine in similar fashion since the bumper I have is the same as yours, just that the bar goes all the way to the ends of the valance. I'll probably just do white as well, I've already got plenty of white lighting from the 40" Rigid bar behind the grille. Just looking for some "driving" lights that point lower and don't blind everyone.
Ambers bro!
 
Top