Chase Rack Designs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CoronaRaptor

FRF Addict
Joined
Dec 17, 2012
Posts
28,961
Reaction score
31,171
Location
CANADA
What's your tube diameter and CLR? Who's bender are you using?
0d53a4d47123f153c6d93ddefaf0bf2d.jpg
 
OP
OP
PorterW1111

PorterW1111

FRF Addict
Joined
Apr 19, 2020
Posts
1,448
Reaction score
2,038
Location
Florida
What's your tube diameter and CLR? Who's bender are you using?
1.75” tube. It’s 6” clr...harbor freight brand 12 ton bender haha notching with a pipe master template and an angle grinder with a cut off wheel. Which I feel more accomplished with as “anyone” can program a bender with bendtech and notch on a plasma notcher...what’s the fun in that! Kidding just jealous
 

MEIRONMAN207

¿Goin somewhere...What are RU waiting 4?
Joined
Jun 26, 2019
Posts
671
Reaction score
1,356
Location
Maine
I know this is still hard work and I can only dream of finding time to do this , but isn’t tweaking it more fun? So my comment is; I’m liking the flow and contour of your attempt to match the cab and all, however, if it were me, I likened to add a couple of small bends and go a small section below the rear lights and just above the sliding window.
 

B E N

FRF Addict
Joined
May 1, 2019
Posts
1,236
Reaction score
1,155
Location
Frederick, CO
1.75” tube. It’s 6” clr...harbor freight brand 12 ton bender haha notching with a pipe master template and an angle grinder with a cut off wheel. Which I feel more accomplished with as “anyone” can program a bender with bendtech and notch on a plasma notcher...what’s the fun in that! Kidding just jealous

Good on you for working with what you've got! If you get a chance to post up some pics of failed bends do so, you should be able to bend 1.75 x .095 on a 6.0 CLR w/out mandrels.
 

CoronaRaptor

FRF Addict
Joined
Dec 17, 2012
Posts
28,961
Reaction score
31,171
Location
CANADA
Good on you for working with what you've got! If you get a chance to post up some pics of failed bends do so, you should be able to bend 1.75 x .095 on a 6.0 CLR w/out mandrels.
I 2nd that, would like to see your *****-ups, lol
 
Top