Morimoto Announces NEW 2nd Gen XB Headlights for Gen2 Raptors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tmeier299

Member
Joined
Feb 18, 2020
Posts
13
Reaction score
8
Location
48307
We just opened our set also, same thing. Seems Morimoto forgot to include the OEM Harnesses in all of the kits they recently sent out. We just emailed them asking what's going on. I know Morimoto switched to a new shipping platform so now they no longer hold shipments if part of the order is out of stock. They just split it automatically. So there is a chance that they shipped the lights and will ship the harnesses when they are in stock. BUT, it would have been nice if us dealers got a heads up right?

Anyway I put an email into them and i'll let you know what they say. I'll respond on here as well as your direct email since all of the Morimoto dealers are experiencing the same issue with the missing OEM LED Harness.
Can you make sure I get the proper harness for the Bugatti options as well. The one DetTigers mentioned
 

DetTigers

Full Access Member
Joined
Jan 12, 2020
Posts
82
Reaction score
42
Location
Michigan
Without the DRL harness neither light worked for the Bugatti startup sequence. After I hooked up the DRL harness only the passenger side works for the Bugatti startup. The lights seem to function fine other than that but I won’t be completely happy until both lights function as they should.

 

Ducc

Full Access Member
Joined
Mar 5, 2020
Posts
103
Reaction score
92
Location
Arizona
Good to finally see these in action, but bummed you guys are experiencing problems. Looking forward to future updates.
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
You need to make sure you remove the drivers off the lights, as they are only used with the Halogen setup.
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Can you make sure I get the proper harness for the Bugatti options as well. The one DetTigers mentioned

I'm not 100% certain you need that. The DRL harnesses are always included as the non-OEM LED trucks need it. But with OEM LED you never use the included harnesses. The 2nd Generation lights are new, so we need to ask if you DO need them. But with the OEM LED setups, you don't wire in the drivers on the back/bottom of the lights, you bypass them (i usually remove them entirely). Those are only needed for halogen equipped trucks, which is why Det might be having issues.
 

DetTigers

Full Access Member
Joined
Jan 12, 2020
Posts
82
Reaction score
42
Location
Michigan
The guys at TRS told me that the Bugatti startup sequence requires the DRL harness because of the power it draws. I tried the lights without the harness and indeed, neither light had the startup sequence. With the DRL harness installed the passenger side works. I tried 4x4LED’s suggestion and removed the driver side DRL connection but it didn’t fix the problem.



3b2d1ebb7b442ef7d6dd31388a235231.jpg
 
Last edited:

DetTigers

Full Access Member
Joined
Jan 12, 2020
Posts
82
Reaction score
42
Location
Michigan
Ok I misunderstood you then. I disconnected the DRL harness from the driver side. What black drivers are you talking about?
 
OP
OP
4x4TruckLEDs.com

4x4TruckLEDs.com

Supporting Vendor
Supporting Vendor
Joined
Jul 18, 2017
Posts
2,827
Reaction score
1,308
Det. who did you buy from? The dealer you bought from should be assisting you. I don't mind helping you out but it's best if you just email me, [email protected] instead
 
Top