HammerHead Steering Wheel in CF

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

911 Crazy

FRF Supporting Member
Supporting Member
Joined
Jul 23, 2019
Posts
7,653
Reaction score
3,134
Location
Maine
Just wish there was a way to have heat run in the models with the CF on top and bottom.
 
OP
OP
Rau Racing Wheels

Rau Racing Wheels

The Future of Custom Steering Wheels
Joined
Dec 5, 2016
Posts
98
Reaction score
54
Location
Los Angeles
Seriously, N or N?????????????????

Crazy good to hear from you.

My time has been elsewhere, and that post from our newbie was better suited for a Hummer forum...

From the technical side -
We can re-wire and therefore retain the factory heating for the remaining leather, when we just remove the upper section. That includes leather, rubber & resistance wires that provide the heat. We can re-wire the remaining wires so that the heat is comparable to the original wheel.
The problem develops when you remove the bottom portion of the leather etc. That section includes the heating sensor along with the connections to the wires coming up from the column.
With that being said, I'll think about it.

Cheers
 

911 Crazy

FRF Supporting Member
Supporting Member
Joined
Jul 23, 2019
Posts
7,653
Reaction score
3,134
Location
Maine
Crazy good to hear from you.

My time has been elsewhere, and that post from our newbie was better suited for a Hummer forum...

From the technical side -
We can re-wire and therefore retain the factory heating for the remaining leather, when we just remove the upper section. That includes leather, rubber & resistance wires that provide the heat. We can re-wire the remaining wires so that the heat is comparable to the original wheel.
The problem develops when you remove the bottom portion of the leather etc. That section includes the heating sensor along with the connections to the wires coming up from the column.
With that being said, I'll think about it.

Cheers

Like I said, you da Man!
 
Top