What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dblack

Full Access Member
Joined
Sep 15, 2019
Posts
406
Reaction score
304
Location
Alabama
How does tint put pressure on it? (I've never had non-factory tinted windows before, but was thinking of doing same to my sunroof so I can run with the fabric cover open during day.)
When they are tinting, they spray the glass to maneuver the tint around and get it situated, and then have to squeegee the water out. The more pressure they use to squeegee, the more moisture they can get out and the faster it'll dry. So in the case of the sunroof, it'd be upward pressure on the glass while squeegeeing.

My tint guy said he has done plenty of F150s and never had any complaints, but my luck I'd be the one that it causes the sunroof to rattle...I'm too OCD for that.
 

Droid

kglesq's Brother
Joined
Sep 25, 2010
Posts
1,483
Reaction score
753
When they are tinting, they spray the glass to maneuver the tint around and get it situated, and then have to squeegee the water out. The more pressure they use to squeegee, the more moisture they can get out and the faster it'll dry. So in the case of the sunroof, it'd be upward pressure on the glass while squeegeeing.

My tint guy said he has done plenty of F150s and never had any complaints, but my luck I'd be the one that it causes the sunroof to rattle...I'm too OCD for that.

Thanks, not worried about that, I'm already fighting the rattle issue. Adjustment and treating the rubber seal appear to be the cure, but it's still an annoying problem....*think*/hope I have mine solved again, at least got 90% of it.
 

Jason Slutsky

Member
Joined
Apr 14, 2020
Posts
41
Reaction score
55
Location
Austin TX
I have been looking at the fog light kits all over everywhere, and amazon has some rigid lights which are white when on and sync up with the amber parking lights. They light amber cornered like the parking lights do when on.

Thinking that is the way to go but not sure yet. Very clean Raptor.
I just got the Rigid Radiance lights off Amazon installed...Good stuff.

I just flipped the bezels over. It was driving me mad that the logos were upside down.

979961a086f17f4b0c2db4297e18262c.jpg36416eb7972c3cc868a55f7de28862c1.jpg

Sent from my Pixel 3 XL using Tapatalk
 
Last edited:

Gerald

Full Access Member
Joined
Sep 2, 2019
Posts
392
Reaction score
621
Location
Houston
Received my last Father's Day gift from my daughter in the mail today. She got me the small Builtright bracket for the bed!

Builtright Bracket.jpg

My plan is to install a LED light on a bogan arm so that I can swing it around and light up different parts of the bed or to the side of the truck. Got the idea from FRF!! Still need to get some of the components before I start the mod process.

She also got me this little baby. Love the way it looks.
Stubby Antenna.jpg

My son also got me this Builtright Velcro attached organizer for the back seats. Loaded it up with a few things to see how it would work. It holds things really nicely.

Builtright Velcro.jpg Builtright Velcro 2.jpg

Can't wait until my birthday to see what they get me! I'll have to start a list for them!!
 

Jason Slutsky

Member
Joined
Apr 14, 2020
Posts
41
Reaction score
55
Location
Austin TX
Why is there a gap on the right and left side just wondering
Just fiddly adjustment getting the lights all straight... When I took the pictures, things were not completely tightened down. Also the angle of the pictures makes it appear like a larger gap than is actually there.

Sent from my Pixel 3 XL using Tapatalk
 
Top