Performance Build in process

What would be your power goals?

  • 400+WHP

    Votes: 10 16.4%
  • 600+WHP

    Votes: 43 70.5%
  • 900+WHP

    Votes: 8 13.1%

  • Total voters
    61

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wrbsti

Member
Joined
Jun 25, 2019
Posts
17
Reaction score
6
Location
Gilbert, AZ
For everyone following, I have two 6.2 engines in process now. That being said, ran into some issues with lack of valve train parts so I’m waiting on production to start on my own setup. Lots of R&D going on with the cylinder heads and I’m excited to see the final results. Stay tuned. :favorites37:

Is the 2nd/yours going to be the livernois cam setup you mentioned before? Whipple as well?

Look forward to seeing more progress!
 

Anthony k

Full Access Member
Joined
Oct 7, 2018
Posts
308
Reaction score
163
Location
Michigan
I used to work at Diamond. It’s cool seeing people use those pistons


Sent from my iPhone using Tapatalk

no **** I used Diamond pistons in my last couple cars. Which has been awhile, so long, that the guy I dealt with at diamond started his own company

Gibby. Gibtech
 

Jhollowell

Full Access Member
Joined
Mar 14, 2016
Posts
671
Reaction score
619
Location
Everett, wa
no **** I used Diamond pistons in my last couple cars. Which has been awhile, so long, that the guy I dealt with at diamond started his own company

Gibby. Gibtech

Ha!!! Yeah he was the foreman when i worked there


Sent from my iPhone using Tapatalk
 

Canuck714

FRF Addict
Joined
Jun 11, 2012
Posts
1,097
Reaction score
872
Location
San Antonio TX
Are you able to elaborate on what valve train components you will be making?
Also, with the boosted engine, how much port and pocket work needs to be done in the head? I was told that the stock head will flow as much boost as the blower (TVS 2300) could pump into it.

Cant wait to see the results of this build, I know that sooner or later, I'll need to freshen mine up.
 
OP
OP
Cody Dawson

Cody Dawson

Perfect Circle Engines
Joined
Apr 24, 2019
Posts
90
Reaction score
76
Location
winchester virginia
Are you able to elaborate on what valve train components you will be making?
Also, with the boosted engine, how much port and pocket work needs to be done in the head? I was told that the stock head will flow as much boost as the blower (TVS 2300) could pump into it.

Cant wait to see the results of this build, I know that sooner or later, I'll need to freshen mine up.

I didn’t want to advertise until it’s physically here but I’ll be offering what I’m almost certain is the only drop in spring kit now and it will have Titanium retainers. Springs will be supplied by PAC and they will be good for all motor or boosted applications up to 40lb.

For the porting you are correct, it’s also recommended to keep as much material and strength in the head when going big boost. I’ll be focusing on the valve seat area and the short turn radius as well as blending some areas and smoothing the combustion chamber.
 
Top