New ADD bumper at sema

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Aug 9, 2010
Posts
1,816
Reaction score
876
Location
Mesa, AZ
What's the weight of your pro bumper?

I half agree with this statement >> Our heaviest bumper, the Honey Badger winch bumper, is 109lbs. Factory is 65lbs. So our HEAVIEST bumper is 44lbs over stock. You will experience more weight difference going from a full tank of gas to a half tank, etc. Or having a passenger in the truck with you.

BUT .. a person and a gas tank is positioned in the middle of the truck and not at the very font of the truck.

These are pickup trucks, not formula 1 cars or a nascar. So a few pounds on the front of the truck will not be noticeable in my opinion, unless you are jumping the truck far distances. I will say that if you are big into jumping your truck, of course the lighter the better. Pro frame cut or pro bolt on would be best. Again, I used the heaviest bumper we make as an example. Most of our front bumpers are the same as stock, or about 10-15 lbs heavier.

PRO frame cut & mounting brackets all together weighs 56lbs (keep in mind you are cutting probably 15 or so lbs of frame off the truck)
PRO bolt on weighs 55lbs
 

Leftsidej

Full Access Member
Joined
Mar 11, 2019
Posts
387
Reaction score
159
Location
Missouri
Bomber is gorgeous. Only issue is how much would those lights cost as well for the set? End up paying 5 grand after it’s all done because you have to run the rigid or Baja lights as I’m sure it looks rather weird without any lights.

Damn.
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,252
Location
Ashburn, VA
I spent $1,669.31 on cyber monday just for lights. And now I have to get the bumper. My biggest peeve is that this bumper cost $2,199.97 and then the ACC bracket runs you another $272.97. GRRRRRR! So my setup will cost $4142. The $2,199.97 should include the ACC bracket.

no doubt ADD is making a killing on their bumpers.

Bomber is gorgeous. Only issue is how much would those lights cost as well for the set? End up paying 5 grand after it’s all done because you have to run the rigid or Baja lights as I’m sure it looks rather weird without any lights.

Damn.
 

Leftsidej

Full Access Member
Joined
Mar 11, 2019
Posts
387
Reaction score
159
Location
Missouri
I spent $1,669.31 on cyber monday just for lights. And now I have to get the bumper. My biggest peeve is that this bumper cost $2,199.97 and then the ACC bracket runs you another $272.97. GRRRRRR! So my setup will cost $4142. The $2,199.97 should include the ACC bracket.

no doubt ADD is making a killing on their bumpers.

What light setup did you go with? Are you also going to go with the bomber? I totally agree. 300 bucks for a bracket is CRAZY. I don’t use adaptive CC so for that price I’d pry hold off on it for awhile personally.
 

Slow6

Full Access Member
Joined
Nov 13, 2017
Posts
476
Reaction score
198
Location
AK
What light setup did you go with? Are you also going to go with the bomber? I totally agree. 300 bucks for a bracket is CRAZY. I don’t use adaptive CC so for that price I’d pry hold off on it for awhile personally.
Or get the Full Race inner cooler that has a built in place to mount the adaptive CC bracket at the top of it.


Sent from my iPhone using Tapatalk
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,252
Location
Ashburn, VA
3 LP6 and a pair of Squadron pros. In my opinion, Baja Design makes a superior product when compared to Rigid. BUT Rigid has gotten better in recent years BUT BD has always made a really really good product. You get what you paid for.

I plan to go with the bomber but the more I think about the ACC bracket, the more it ****** me off.

I believe the only vote we have as consumers is our wallet.

I am also considering this bumper where the ACC bracket is included and much lighter and no rust EVER. Granted I have to add some light tabs >> http://www.bajamod.com/bumpers/bajamod-blade

What light setup did you go with? Are you also going to go with the bomber? I totally agree. 300 bucks for a bracket is CRAZY. I don’t use adaptive CC so for that price I’d pry hold off on it for awhile personally.
 
Last edited:

Leftsidej

Full Access Member
Joined
Mar 11, 2019
Posts
387
Reaction score
159
Location
Missouri
3 LP6 and a pair of Squadron pros. In my opinion, Baja Design makes a superior product when compared to Rigid. BUT Rigid has gotten better in recent years BUT BD has always made really really good product. You get what you paid for.

I plan to go with the bomber but the more I think about the ACC bracket, the more it ****** me off.

I believe the only vote we have as consumers is our wallet.

I am also considering this bumper where the ACC bracket is included and much lighter and no rust EVER. Granted I have to add some light tabs >> http://www.bajamod.com/bumpers/bajamod-blade

That is very true, good points. Nice looking bumper there, I do like the Bomber, like a lot. Upsets me that I have to drop all that money on to mandatory lights, though. Wonder if another company like maybe KC or someone makes a cheaper version that would fit in the bumper?
 
Top