Geisers, Deaver +3s, RPG Bumps and 37s (Pics)

[TheClaw]

Miller Offroad Design made a custom bumper for me. I did not like the bumpers from the other vendors, so he built one similar to others he has done in the past. I asked him to cut the frame horns and do a simple single-bar design with a hoop on top to protect the 40" BD Arc light bar. The bumper is getting powdered-coated before being fitted to the truck.

---------- Post added at 09:31 AM ---------- Previous post was at 09:29 AM ----------



Thanks! Sometimes the smallest things, like removing part of a graphic, can really change the look for the better...

Where can I see pictures of the sticker mod you did. Interested

 

[B boyes]

Okay, so If I do Deaver +3 I need to budget for bump stops and I should be all good. Thanks for the info. I will put it to good use.

 

[xrocket21]

Okay, so If I do Deaver +3 I need to budget for bump stops and I should be all good. Thanks for the info. I will put it to good use.

you can just do bump plates too

 

[TXRaptor]

Where can I see pictures of the sticker mod you did. Interested

Here is the thread where I explain how I modified my 2018 factory stickers: (it will be the same for the 2017MY)

https://www.fordraptorforum.com/threads/has-anyone-modified-the-factory-raptor-stickers.62079/

Here is what they look like now after I finally trimmed the black square out of the middle of the "O" in Raptor: (I did not do it in the original pictures from the thread above)



The other day I was at a Ford Dealer and I noticed the 2019MY rear stickers will be a LOT easier to modify because they are no longer one large sticker. You can easily remove just the outer edge black graphics and leave the word "Raptor" without using an Exacto knife.

 

[TXRaptor]

you can just do bump plates too

Yes, bump pads are much cheaper than full-on bump stops. SDHQ carries a set for a pretty good price $$. (1/10 the price of bump stops)

https://sdhqoffroad.com/products/17-current-ford-raptor-sdhq-built-bump-pad

 

[Jeff-Ohio]

Okay, so If I do Deaver +3 I need to budget for bump stops and I should be all good. Thanks for the info. I will put it to good use.

I believe I only paid like $60 to $80 for my replacement bump stops when I went to Deaver +3s, so no budgeting is needed.

 

[911 Crazy]

my bad! didnt mean to ruffle any feathers!

You didn't. We'll a few brain cells short up here. What part of Maine?

 

[TXRaptor]

I see this thread was resurrected again and I realized I never posted the pictures of my Matte Black "Baller Roof", "Stinger Hood" and B-Pillars after getting them done over a year ago. I had it done at a local shop that does car wraps and they charged me $600 for all three areas. They used the extra material from the moonroof cutout for the b-pillar covers. A gloss black (darker) would have showed up better on the Magnetic color, but I wanted it to match what is left of my Raptor Bed graphics and wheels.

I also painted the factory rear light with several coats of VHT Nite-shades and clear coat because I hated how it looked against the black roof.

 

[xrocket21]

You didn't. We'll a few brain cells short up here. What part of Maine?

Central Maine. You and your wife auto-x porsces together?