What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chiefapple

Full Access Member
Joined
Nov 3, 2017
Posts
812
Reaction score
922
Location
Milwaukee, WI
Installed the passenger side deaver today. Wish I had known I had to remove the driver side shock and u-bolts before I started. I was scratching my head wondering how I was going to get those perches lined up in the leaf pack...


Sent from my iPhone using Tapatalk
 
D

Deleted member 12951

Guest
Installed the passenger side deaver today. Wish I had known I had to remove the driver side shock and u-bolts before I started. I was scratching my head wondering how I was going to get those perches lined up in the leaf pack...

You don't have to remove the shock or ubolts on the driver side to install the passenger side. There is an RPG video on how to swap out the leaf springs.
 

Chiefapple

Full Access Member
Joined
Nov 3, 2017
Posts
812
Reaction score
922
Location
Milwaukee, WI
You don't have to remove the shock or ubolts on the driver side to install the passenger side. There is an RPG video on how to swap out the leaf springs.

I watched it. I swear I couldn’t get those centering posts lined up till I loosened the other side. Maybe I just couldn’t get the truck high enough.


Sent from my iPhone using Tapatalk
 

Swacer

Full Access Member
Joined
Dec 5, 2012
Posts
237
Reaction score
79
Location
PA
Finally got around to installing my rear bumper. It was a PITA to install as expected. The inner sensors didn't fit snug and the upper mounting slots didn't align to the factory holes. Both had to be modified to get it on the truck properly. Yet another reason I will NEVER buy anything again from Rogue Racing.

View attachment 124958

View attachment 124957

Thats a shame because thats really a sharp bumper
 
Top