Icon Multi-Rate Rear Leaf Spring Kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slow6

Full Access Member
Joined
Nov 13, 2017
Posts
476
Reaction score
198
Location
AK
I only have 100 miles on mine in setting two and I think what you guys are hearing is your shackles.

Are you both running stock shackles? Stock shocks?

My icons don’t make anymore noise than my deaver +2HD and they did not make any odd noise.

I have camburg stock length shackles and no noise. My brother runs stock shackles and his squeaked for the first week after install. Also take a look at your brake line on the frame.


Sent from my iPhone using Tapatalk
What’s the issue/deal with the brake line?


Sent from my iPad using Tapatalk
 

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
978
Reaction score
381
The line for the e brake that runs along the side of the frame on drivers side. Has connection points running along the frame and could be slapping the bottom of the leafs as well if the insulator was moved or damaged during install.

Not the actual brake line for the calipers sorry I should have clarified;)

These. Which reminds me I need to clean up my axle:(
cd2f53526f49392ff09a4f12a1f6d6d8.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

Cuzin Eddie

Full Access Member
Joined
Sep 16, 2018
Posts
109
Reaction score
59
Location
St. George, UT
I only have 100 miles on mine in setting two and I think what you guys are hearing is your shackles.

Are you both running stock shackles? Stock shocks?

My icons don’t make anymore noise than my deaver +2HD and they did not make any odd noise.

I have camburg stock length shackles and no noise. My brother runs stock shackles and his squeaked for the first week after install. Also take a look at your brake line on the frame.


Sent from my iPhone using Tapatalk

I am stock shackles, but I have the Fox 3.0 adjustables. The noise is driving me CRAZY!
 

Cuzin Eddie

Full Access Member
Joined
Sep 16, 2018
Posts
109
Reaction score
59
Location
St. George, UT
The line for the e brake that runs along the side of the frame on drivers side. Has connection points running along the frame and could be slapping the bottom of the leafs as well if the insulator was moved or damaged during install.

Not the actual brake line for the calipers sorry I should have clarified;)

These. Which reminds me I need to clean up my axle:(
cd2f53526f49392ff09a4f12a1f6d6d8.jpg



Sent from my iPhone using Tapatalk

I noticed that too and I made some adjustments but still there.
 

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
978
Reaction score
381
I am stock shackles, but I have the Fox 3.0 adjustables. The noise is driving me CRAZY!

It’s probably a combo of shackles and shocks! I haven’t installed my fox factories yet but I was told to run them wide open on the street.


Sent from my iPhone using Tapatalk
 

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
978
Reaction score
381
Idk brother I’ll see if I can slap them on tomorrow I’m a gluten for punishment


Sent from my iPhone using Tapatalk
 

Viper01

Member
Joined
Mar 19, 2018
Posts
34
Reaction score
15
Location
FL
I only have 100 miles on mine in setting two and I think what you guys are hearing is your shackles.

Are you both running stock shackles? Stock shocks?

My icons don’t make anymore noise than my deaver +2HD and they did not make any odd noise.

I have camburg stock length shackles and no noise. My brother runs stock shackles and his squeaked for the first week after install. Also take a look at your brake line on the frame.


Sent from my iPhone using Tapatalk

Yes stock shackles/shocks.
 

Slow6

Full Access Member
Joined
Nov 13, 2017
Posts
476
Reaction score
198
Location
AK
I hope it’s the stock shackles not the shocks.


Sent from my iPhone using Tapatalk
 
Top