2017 M&R Ford Raptor Fog Kit Prototype

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
MandR Automotive

MandR Automotive

Supporting Vendor
Supporting Vendor
Joined
Jan 29, 2012
Posts
1,060
Reaction score
561
Its not going to be in a cylinder. It will be angled so some of the light will be visible depending on the angle that you look at it. It might be 0.5-1" max nothing significant. But will give it an awesome staggered look.
 
OP
OP
MandR Automotive

MandR Automotive

Supporting Vendor
Supporting Vendor
Joined
Jan 29, 2012
Posts
1,060
Reaction score
561
Hey guys want to give you guys progress of our prototype. These images are just to show you guys our vision. It does not illustrate final dimensions or spacing. Let us know what you think

20170212_195926_zps035zi1bk.jpg
20170212_195728_zpszutpqvyv.jpg
20170212_195629_zpsndolmffc.jpg
 

NJSP117

Full Access Member
Joined
Jun 27, 2012
Posts
344
Reaction score
142
Location
New Jersey
Looks clean....but I'm not sure I'm a big fan of the round lights. How will it mount in there? Will it be in contact with the bumper? When I had the 4 Rigid duallys mounted on my 13, they were in contact with the bumper and after some off road runs, they had chipped the paint off the bumper...not a big deal, but I never thought the fitment was all that great on that setup. Yours looks cleaner, and I think it will grow on me once I see the final product. Probably about the only thing you can do with the steep angle of the new bumper....
Just my opinion...not knocking them at all...I think it's a great idea, just not sure about the styling yet.....
 
OP
OP
MandR Automotive

MandR Automotive

Supporting Vendor
Supporting Vendor
Joined
Jan 29, 2012
Posts
1,060
Reaction score
561
We will try to design the final product so that it does not ruin the paint with vibration. We think that once its painted it will look a lot better and cleaner. Thanks for the comment. We really pay attention to peoples requests when making our products.
 

sea2jet

Full Access Member
Joined
Dec 31, 2016
Posts
112
Reaction score
102
Looks great...I'm assuming there will be a housing around each light to blend them in? How do you think cornering lights will work in the end position?
 

CSJr

Full Access Member
Joined
Nov 3, 2016
Posts
299
Reaction score
198
Location
GA
Can these lights be submerged without shorting out? Question is in regards to truck fording. Suppose question can apply to all aftermarket fog inserts..
 
OP
OP
MandR Automotive

MandR Automotive

Supporting Vendor
Supporting Vendor
Joined
Jan 29, 2012
Posts
1,060
Reaction score
561
Can these lights be submerged without shorting out? Question is in regards to truck fording. Suppose question can apply to all aftermarket fog inserts..

Yes of course. They are IP68 water rating.
 

kdub405

Full Access Member
Joined
Jun 18, 2014
Posts
684
Reaction score
371
Hey guys want to give you guys progress of our prototype. These images are just to show you guys our vision. It does not illustrate final dimensions or spacing. Let us know what you think

20170212_195926_zps035zi1bk.jpg
20170212_195728_zpszutpqvyv.jpg
20170212_195629_zpsndolmffc.jpg



Digging the look!!


Sent from my iPhone using Tapatalk
 

Jeff-Ohio

Full Access Member
Joined
Nov 3, 2016
Posts
909
Reaction score
451
Location
Cincinnati
Hey Jeff.. Its hard to answer your questions because most aftermarket lights are for off road use only. Even though a lot of people use them on the street does not make them 100% legal. I would say spots and point them lower

Thanks for the response. Do you have any pictures showing the front of the truck at night? I am curious about the color of the fog lights in comparison to the stock headlights.
 

Mark986

Full Access Member
Joined
Dec 1, 2016
Posts
242
Reaction score
105
Will you offer a cube option? I think the cubes go better with the boxy/bulky front end of the raptor.

Just my opinion. But your work looks clean!
 
Top