Aftermarket Wheels

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SOAKINRED

Full Access Member
Joined
Mar 3, 2016
Posts
576
Reaction score
251
Location
Orange County CA
Factory Offset

We deal with a few companies that make wheels in higher offsets. XD actually does one of their wheels in the factory offset. Unfortunately Method only does a +00 in the 17's. They do however offer a +18 in the 18" sizes. Shoot me a PM if you want some options.

I was going to go Method, but re-thinking it?

What Matte Black wheels out there have the factory Offset?
 
OP
OP
Kansan

Kansan

Full Access Member
Joined
Oct 21, 2016
Posts
252
Reaction score
313
Any thought on these for a black screw. I am not a fan of the stock wheels. I did not get the bead locks. I also want to stay away from chrome but don't want completely blacked out wheels either. I think there needs to be some contrast. Any opinions appreciated. [emoji1417


I'm also a fan of these too.

I think the fuel beasts, recoil, ripper and of course trophy would look great. The Vapor are good looking wheels as well but there jut too much going on in the design for a 17" wheel... for me personally.

I went with Method Grid but, had I taken a harder look a the fuel wheels, I very well could have ended up with the Fuel Recoil...
 

SOAKINRED

Full Access Member
Joined
Mar 3, 2016
Posts
576
Reaction score
251
Location
Orange County CA
Wheels

I think the fuel beasts, recoil, ripper and of course trophy would look great. The Vapor are good looking wheels as well but there jut too much going on in the design for a 17" wheel... for me personally.

I went with Method Grid but, had I taken a harder look a the fuel wheels, I very well could have ended up with the Fuel Recoil...

I was going to do Method MR310 Con 6 Matte Black, but then everyone started talking about the offset being 0 and I don't want my wheel to stick out to far, I would never want it to hit the bed sides and if it sticks out water slings up and gets your truck dirty fast.
 
OP
OP
Kansan

Kansan

Full Access Member
Joined
Oct 21, 2016
Posts
252
Reaction score
313
I was going to do Method MR310 Con 6 Matte Black, but then everyone started talking about the offset being 0 and I don't want my wheel to stick out to far, I would never want it to hit the bed sides and if it sticks out water slings up and gets your truck dirty fast.

I liked the Con6 myself, seems like most of the method wheels are available in 17" 6on135 with 0 offset
 

SOAKINRED

Full Access Member
Joined
Mar 3, 2016
Posts
576
Reaction score
251
Location
Orange County CA
Fuel vs Method

I liked the Con6 myself, seems like most of the method wheels are available in 17" 6on135 with 0 offset

I think maybe Method might look better but the 0 offset has turned me off.

I'm thinking FUEL RIPPER but they haven't posted the offset size yet, I like the recoil also and it has a 7 offset.

I would like to be in the middle of the factory offset, someone posted it was 34 for the factory offset. So 12 to 20 I think would work great.

RIPPER_17x9_MATTE_BLK_A1_500.png
 
Last edited:

HORN HIGH ACES

Full Access Member
Joined
Sep 3, 2015
Posts
675
Reaction score
438
Location
Colorado
I think maybe Method might look better but the 0 offset has turned me off.

I'm thinking FUEL RIPPER but they haven't posted the offset size yet, I like the recoil also and it has a 7 offset.

I would like to be in the middle of the factory offset, someone posted it was 34 for the factory offset. So 12 to 20 I think would work great.

From what I've seen, you'll have to go with 18s with Fuel or Methods to get a higher offset. Micky Thompson deegan 38 pro 4 17x9 18 offset or Black rhino el cajon 17x9 12 offset would be a couple other options.
 

Carsten89

Full Access Member
Joined
Nov 10, 2015
Posts
127
Reaction score
74
Location
Springfield, MO
Top