Aftermarket Wheels

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,577
Reaction score
3,058
Location
ME
The rotors bs is 5", are we sure stockers are 5". Seems like they would sit out more like the fuels?

I'm pretty sure the stockers are about 6"" backspacing or +34mm offset. The Fuel Rotors are 5" backspacing or +7mm offset.
 
Last edited:

_M_

Full Access Member
Joined
Aug 19, 2013
Posts
406
Reaction score
309
I'm pretty sure the stockers are about 6"" backspacing or +34mm offset. The Fuel Rotors are 5" backspacing or +7mm offset.

Ok. Cool.

So to be clear. Less backspace would have the wheel sit out a bit further?

Or is it fewer backspace :|
 
Last edited:

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,577
Reaction score
3,058
Location
ME
Ok. Cool.

So to be clear. Less backspace would have the wheel sit out a bit further?

Or is it fewer backspace :|

The 5" backspace Fuel Rotors would stick out 1" more than the 6" backspace stockers.
Usually you have to figure in the difference in width too, but both are 8.5" so it's a wash.
 
Last edited:
Top