Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Registered members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
RAM TRX - TRX-Forum.com
Bronco Raptor - BroncoRaptorForum.com
Forums
GEN 1 (2010-2014) Ford SVT Raptor Forums
Ford Raptor Lighting Modifications Forum [GEN 1]
front bumperettes
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Badazzraptor" data-source="post: 927226" data-attributes="member: 19139"><p>Well mine is all back together so I really can't take photos of the process but I can walk you through it step by step. The plastic cover snaps onto the base plate of the bumperette. Once you snap the plastic cover off you can't get the little tabs that hold it on back over the base plate while it's bolted to the bumper. The base plate is held on with two studs with nuts. The problem is you can't get to these nuts. But if you remove the skid plate which I believe is 6 14mm or 15mm bolts you will see the two bolts that hold the tow rings on. Remove these bolts and the tow hook will come off. Now you can see the two nuts that hold on the base of the bumperette. You can now get a box end wrench on these nuts. Remove them and the base plate will come off. Now it is easy to snap the little tabs of the cover back on the base. Next bolt the base plate with cover attached back in place. Then the tow hooks and then the skid plate. Wala there back on without breaking or damaging the little tabs on the cover. An impact wrench does make the job go a lot faster but all you really need is a socket, ratchet and a box or open end wrench which almost everybody has. It took me less than 15 minutes with an impact but if you just use a ratchet your probably looking at 1/2 hour. Hope this helps. Let me know how it goes.</p></blockquote><p></p>
[QUOTE="Badazzraptor, post: 927226, member: 19139"] Well mine is all back together so I really can't take photos of the process but I can walk you through it step by step. The plastic cover snaps onto the base plate of the bumperette. Once you snap the plastic cover off you can't get the little tabs that hold it on back over the base plate while it's bolted to the bumper. The base plate is held on with two studs with nuts. The problem is you can't get to these nuts. But if you remove the skid plate which I believe is 6 14mm or 15mm bolts you will see the two bolts that hold the tow rings on. Remove these bolts and the tow hook will come off. Now you can see the two nuts that hold on the base of the bumperette. You can now get a box end wrench on these nuts. Remove them and the base plate will come off. Now it is easy to snap the little tabs of the cover back on the base. Next bolt the base plate with cover attached back in place. Then the tow hooks and then the skid plate. Wala there back on without breaking or damaging the little tabs on the cover. An impact wrench does make the job go a lot faster but all you really need is a socket, ratchet and a box or open end wrench which almost everybody has. It took me less than 15 minutes with an impact but if you just use a ratchet your probably looking at 1/2 hour. Hope this helps. Let me know how it goes. [/QUOTE]
Insert quotes…
Verification
Post reply
Members online
Pismobound
eljefe_tx
FP_RPTR
ToadSmasher2K1
Sharpie69
Bozz
Eisner62
AGENTX
Jdselig
kocher93
r3run33
sambhutta
17baker
raceguy3820
WhiskeyTangoGTFO
downforce137
Nesc204
Neens
2slo4u
EastEndAngler
YelloEye
raptordoke
vill
simaster
Raptorman19
Latchkey Kid
Jmoses77
Prormk
NashvillePlowWorks
jsmaage
Jhollowell
MidnightSpecial
23f150
wheelman55
mprice1234
MDJAK
letsgetthisdone
Mossy 150
GCATX
alockbox
IDI-Charlie
jond
Rekkr
jAKe47
Highwayman
IIAWAH808
butts182
sukid
Devilsfan72
GaoKS
... and 22 more.
Forum statistics
Threads
93,198
Posts
1,955,844
Members
56,485
Latest member
bjorn-dpc
Forums
GEN 1 (2010-2014) Ford SVT Raptor Forums
Ford Raptor Lighting Modifications Forum [GEN 1]
front bumperettes
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top