Problem with Rigid D2 light install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pat'sRAPTOR

FRF Addict
Joined
Jul 17, 2011
Posts
5,590
Reaction score
2,068
Location
Everywhere
Yea they could have ran the wires long enough to be able to splice them together under the glove box not in a tiny ass hole
 
OP
OP
M

midipuppies

Member
Joined
Mar 14, 2013
Posts
13
Reaction score
1
That's right the wires from the switches are different gauges but all the passthrough wires are the same gauge.

I think I see my mistake now. If the skinny wires are for aux 3 and 4, then I know for sure they aren't hooked up to anything. I'm sure that the Rigid instructions told me to use the thicker guage wires tho.....
Tomorrow I will use a skinny wire to a pass thru wire and I bet it works.

Will let you know!

Jay
 
OP
OP
M

midipuppies

Member
Joined
Mar 14, 2013
Posts
13
Reaction score
1
I think I see my mistake now. If the skinny wires are for aux 3 and 4, then I know for sure they aren't hooked up to anything. I'm sure that the Rigid instructions told me to use the thicker guage wires tho.....
Tomorrow I will use a skinny wire to a pass thru wire and I bet it works.

Will let you know!

Jay

So I got it sorted. Aux 3 is one of the skinny wires with the purple trace on it.
Thanks all for your help.
 
Top