Wiz's Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
wiz1500

wiz1500

Full Access Member
Joined
Aug 24, 2011
Posts
366
Reaction score
464
On to some current work..
The truck is getting a Winters shifter put in.. A few pic. of the custom brackets and center consol work.
DSC01002_zpsr4meqmwh.jpg
DSC01008_zpsb2jcntyx.jpg
DSC01006_zpsomdp1uko.jpg
Trans bracket.
DSC01011_zps88jpqmrc.jpg
DSC01012_zpstdk3bthn.jpg
I will have to extend the back of the trans bracket about 2 1/2" to get the cable centered.
11264863_10204427254665366_2724351202972603392_n.jpg

More soon.
 
OP
OP
wiz1500

wiz1500

Full Access Member
Joined
Aug 24, 2011
Posts
366
Reaction score
464
Ok front end is reinforced and the 4:88's are in..
The front really didn't need this as I run the correct skid plate that protects the lower cross member. It was just for piece of mind..
11052037_10204370119117013_4159623294179158642_n.jpg

10930990_10204370118516998_4652888948258669026_n.jpg

Make sure you clamp the plates and boxes straight so nothing moves around. also I don't recommend burning these plates in with the control arms still in place as these will compromise the rubber bushings.
11188447_10204370119517023_5096268152173141683_n.jpg
 
OP
OP
wiz1500

wiz1500

Full Access Member
Joined
Aug 24, 2011
Posts
366
Reaction score
464
Gears were a standard deal with only one exception you guy's may not know..
When setting the carrier back into the front case you have to squeeze said case so the shims will not damage there alum. pockets..
10420133_10204454533587322_162627858310534502_n.jpg

11263101_10204454533827328_7696174983213264358_n.jpg

11255778_10204454533987332_7006310226366830990_n.jpg

This is where we stand now with 4 days till Time Attack...
11214353_10204456908086683_5559451054158196006_n.jpg
 

vanilla_gorilla

FRF Addict
Joined
May 25, 2011
Posts
2,513
Reaction score
1,003
Location
NorCal (Sacramento)
Why the new shifter? So you won't have T/H mode or manual mode? What about the 6 gears in the trans? Your shifter only shows 4 gears?

And pardon my ignorance on the above questions, just curious.
 

t_j

FRF Addict
Joined
Sep 10, 2013
Posts
2,753
Reaction score
2,310
Location
Chicago, IL
2010s don't have manual mode so no loss there. Mapping for 4 will be drive most likely every thing else mapping to its original position.
 
Top