Ford Raptor Forum

Think I am about ready to go... Please look at OP and see if I forgot something...

Thanks!

-Greg

__________________
5star tune X3 | AFE stage 2 cai | Recon smoked tail lights | Recon smoked third brake light | Bakflip F1 | Craven stubby | Weathertech | Jimmi jammer gate keeper & hood latch protector | Ducati's custom blacked out 35w bi-zenon projector headlights! | Easydown tailgate | Bedrug | 315/70R17 Goodyear DuraTracs | ATX Artillery Teflon Black 17x9 -12mm | Swaybar removed | RPG stage 3 rear kit | RPG BLACK tie rod | RPG Raceline 1.5" UCA |

I always bring fluids. 5-7 quarts of oil depending on room. 1 quart of gear lube. PS fluid and brake fluid. Spare fan belt (I have 75k miles though). Assorted metric nuts and bolts.

But very nice job, definitely going to be well prepped.

Thanks Trey!
Think I can squeeze that stuff in there also...Thanks for the suggestions..

Better prepared than caught off guard..

-Greg

__________________
5star tune X3 | AFE stage 2 cai | Recon smoked tail lights | Recon smoked third brake light | Bakflip F1 | Craven stubby | Weathertech | Jimmi jammer gate keeper & hood latch protector | Ducati's custom blacked out 35w bi-zenon projector headlights! | Easydown tailgate | Bedrug | 315/70R17 Goodyear DuraTracs | ATX Artillery Teflon Black 17x9 -12mm | Swaybar removed | RPG stage 3 rear kit | RPG BLACK tie rod | RPG Raceline 1.5" UCA |

I just need to pick up my fire extinguisher and i'm set to go!

__________________

Here is the first part of my installs:

Streamlight strion led and charger
uploadfromtaptalk1330814557136.jpg
I disassembled the lid and mounted the charger right above the mp3 holder. Using 8/32 bolts, lock washers and nuts. Routing the plug through mp3 holder and cable between inner and out lid shells.
uploadfromtaptalk1330814574870.jpg
I left the cigarette plug end on the cable for right now, so I can plug and unplug charger.

Icom F5021 radio:
uploadfromtaptalk1330814895318.jpg
I just mounted the bracket 3 1/2 inches from bottom of tray. This leaves enough room around the radio for ventilation, visible to both driver and co-driver, and tray can still be used. Still working out wiring, once I get the mount and antenna. Still deciding if I want to run the radio from upfitters or directly from battery.

-Greg

__________________
5star tune X3 | AFE stage 2 cai | Recon smoked tail lights | Recon smoked third brake light | Bakflip F1 | Craven stubby | Weathertech | Jimmi jammer gate keeper & hood latch protector | Ducati's custom blacked out 35w bi-zenon projector headlights! | Easydown tailgate | Bedrug | 315/70R17 Goodyear DuraTracs | ATX Artillery Teflon Black 17x9 -12mm | Swaybar removed | RPG stage 3 rear kit | RPG BLACK tie rod | RPG Raceline 1.5" UCA |

I'm going MacGyver:

Swiss Army knive
1 stick big red gum
paper clip
rubber band
plaid bandanna


with this I will construct a thermo-nuclear device, or possibly get good breath, wipe the sweat from my forehead and shoot someone with a paperclip from my rubber band.

haven't decided which yet.

__________________
_____________________________________
2011 Scab: Method Fat Fives, Mid Perch, ADD Stealth Fighter, Warn 9.5cti, Rigid 20, 6 and 2, ADD Dimple R, Airraid, Wicked Pedal Kit, LED bulbs, LED Tail Lights, EZ Down Tailgagte, Valentine Hardwire, $2.99 Sub mod, USB2 mod

You forgot a couple strips of duct tape stuck to your ass.

__________________
2008 Shelby GT500 (full race car)
2008 Shelby Terlingua V6 S/C 464rwhp
2011 Raptor PreRunner - Outlaw Raptor Long Travel, Caged and Street Legal
2012 Raptor SCrew Blue - Kings, Outlaw Raptor Bump Stop Kit

Zip ties.