GEN 2 Please help!!!!!

I️ just got my black lung nuts in and I️ go to access the jack and tools and I️ can’t figure out how to access them! They’re behind the passenger rear seat in my SCREW, and I had to cut the Velcro just to get to half of the kit! How do you get everything out? (2018 Screw Raptor)


Sent from my iPhone using Tapatalk

Yes thank you I️ looked through them and there’s nothing specific for the Raptor. Just the f-150


Sent from my iPhone using Tapatalk

Carbonfiber01,
In the 2013 supercrew, there is a tray under the drivers' side rear seat. Lift out the tray and look towards the passenger side under the upper floor panel. You will see a red ******** the jack/handles box. Above the box, and through the upper floor panel are two wing bolts that need to be loosened so that you can pull the jack box into the open space where the tray resides. You can then grab the 2nd red ******** the side and roll the box onto it's side which will allow you to pull it out.
There is no difference for the Raptor or F-150 jack placement...

Eddie

The lug wrench and tools are a big velvet pouch with "SVT" embroidered on it....Oh wait..

So I would think that would be some serious answers on here but it is what it is. The rear seat upper, needs to be flipped down by pulling the ******** the top left side. Once flipped down, The tools can be easily accessed.

OK...so see your little Orange 2018 F-150 Quick Reference Guide?
Go to page 23 (the inside back cover). Column 1 has the info you seek.

Then go to the fat 2018 F-150 Owners Manual.
Info on Wheels and Tires begins on Pg 377.
It gets around to talking about the jack and tools on Pg 401.

The Ford version of what is in these pics is on Pg 402. The Manual says to remove the black strap first so you can get the tools out of the vehicle which makes undoing the red velcro straps easier. I chose to remove tool pouch first, separately from the jack.

Hope this helps.