Paint transfer on fender flares

So I well, I now have some paint transfered onto my right rear fender flare(stupid tight parking garage) anyway it's just some standard white paint that rubbed onto the flare. Any idea how to remove it? I have no idea what the flares are even coated in, if anything. Thank you.

The flares are just plastic, probably some elbow grease will get it off

Ended up using a clay bar which took care of it.

Only permanent damage is two small marks where the pole went through the plastic that I can live with. Might line x them later on.

Yep, clay was going to be my first recommendation. Glad you got it off there!

Unfortunately I was out of clay I like(riccardo) and ended up using mothers. I would've much preferred chemical guys or Adams

I just had a similar thing happen with a yellow plastic guard post at a drive thru. Two or three yellow streaks about two or three inches in length.

I didn't have any compound so I lightly went over the area with NOXON a metal polish that I use for silver and such. Took it right off with NO damage.

Gotta watch the extra width of this new Raptor.

Cliff