2017 Raptor Sound System Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mcasseba

Full Access Member
Joined
Mar 19, 2012
Posts
160
Reaction score
74
I am nearing the finish of this over the top sound system install working with Noah from The Car Stereo Company, so I figured I would show some of the build process.

This is my third Raptor with a stereo upgrade and I feel this is the one. All of the install is completely custom and I did not drill a single hole throughout the process. Noah built all the custom bases and is in the process of molding a custom fiberglass box to house 2-10” Audiomobile Evo subs and one Mosconi amplifier.

I will post the final write up and install once its complete in a couple weeks. Noah needs to build the box and finally tune the system for perfection

Equipment

2 – 10” Audiomobile EVO subs
Mosconi AS300.2
Mosconi AS100.4
Mosconi Pico
Mosconi 6to8 DSP
Amp Pro Kit
K2 ES165 Speakers
K2 EC165 K Speakers
5 rolls of Focal Bam
2 Boxes of Black Hole Tiles
 

Attachments

  • Equipment.jpg
    Equipment.jpg
    89.7 KB · Views: 200
  • Amp Pro2.jpg
    Amp Pro2.jpg
    99.5 KB · Views: 177
  • door 2.jpg
    door 2.jpg
    153.8 KB · Views: 175
  • door3.jpg
    door3.jpg
    80.9 KB · Views: 182
  • black tile.jpg
    black tile.jpg
    91 KB · Views: 170
  • black tile 2.jpg
    black tile 2.jpg
    92.5 KB · Views: 184
  • floor focal.jpg
    floor focal.jpg
    163.4 KB · Views: 189
  • headliner.jpg
    headliner.jpg
    89.1 KB · Views: 205
  • sub amp.jpg
    sub amp.jpg
    82.7 KB · Views: 211
  • compartment.jpg
    compartment.jpg
    105.7 KB · Views: 201

BBLV

Full Access Member
Joined
Oct 1, 2011
Posts
228
Reaction score
130
Location
Newport Beach
Curious on your choice of Audiomobile subs. I've never personally used them, just curious if you've heard them. I've only read not-so-good things about the company in the past...

Build is looking awesome, thanks for sharing pics.
 

WhatExit?

FRF Addict
Joined
Mar 11, 2014
Posts
1,800
Reaction score
1,211
Location
48th state
Looks like big buck$ for all the gear plus the custom work plus the installation. I hope it sounds incredible and it's worth the coin $pent.

Let us know how it sounds and if we can get something similar from Noah :)
 
OP
OP
M

mcasseba

Full Access Member
Joined
Mar 19, 2012
Posts
160
Reaction score
74
Curious on your choice of Audiomobile subs. I've never personally used them, just curious if you've heard them. I've only read not-so-good things about the company in the past....

Yes, I had the GTS series in last truck and upgraded to Evo for this build. So far I think these are the best shallow sub since you only have 5" of mounting depth to work with. They hit hard with a nice level of output.
 

BBLV

Full Access Member
Joined
Oct 1, 2011
Posts
228
Reaction score
130
Location
Newport Beach
Have any details or pics of what and where you connected the factory harnesses to the PAC unit?
 

The Car Stereo Company

aka grumpy car stereo guy
Supporting Member
Joined
Jul 8, 2012
Posts
31,593
Reaction score
21,460
Location
here, on frf
Curious on your choice of Audiomobile subs. I've never personally used them, just curious if you've heard them. I've only read not-so-good things about the company in the past...

Build is looking awesome, thanks for sharing pics.
i run 2 gts 10in in my truck with 950 watts. they are a much better sounding speaker than anything else that will fit under there without spending a lot more money. the speakers themselves are awesome speakers. the company however had some issues but never with product reliability. i actually dropped jl audio because these are a better speaker all around by far
 
OP
OP
M

mcasseba

Full Access Member
Joined
Mar 19, 2012
Posts
160
Reaction score
74
Have any details or pics of what and where you connected the factory harnesses to the PAC unit?

It is a simple plug and play, it plugs right into two factory harnesses located on the factory radio/LCD and provides 6 inputs of RCA's. It mounts right behind the head unit.
 

BBLV

Full Access Member
Joined
Oct 1, 2011
Posts
228
Reaction score
130
Location
Newport Beach
It is a simple plug and play, it plugs right into two factory harnesses located on the factory radio/LCD and provides 6 inputs of RCA's. It mounts right behind the head unit.

Any way to output the factory center channel signal with this Pac unit?
 

Johngm45

Full Access Member
Joined
May 19, 2017
Posts
293
Reaction score
80
Looks like I'm going to be in the same boat only running Hertz audio and a 7 day build time . Looking forward to matching the audio with the rest of the raptor
07480e71bda6b1db429a800dfdfb1870.jpgaa049766ea8c0eee918952da5ab374fb.jpg36367d27d85f9d8df351f52e06da2d7c.jpg


Sent from my iPhone using Tapatalk
 
Top