GEN 2 We need Ford Performance to Make a Gen2 Light Bar

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Micha

Full Access Member
Joined
Dec 31, 2016
Posts
437
Reaction score
268
Location
Illinois
N-Fab make 4 different bars that fit the bill. They make them for straight or curved bars with or without the top protection bar.

I've included some pictures below:

Multi-Mount Open Top, Straight - $149
5255230c61f936af6eee97d5749550bf.jpg

Multi-Mount Open Top, Radius - $199
b819077b578aa2f6fc53333998cb01d9.jpg


The first three bars feature Multi-Mount so that you can mix and match various lights bars, cubes, or any type of surface mount light. The 4th bar can only mount a 30" straight LED bar.

The straight bar mounts can mount up to a 30" light on its own. We have a way to make it fit a 40" straight light bar on its own.

The radius bars can mount up to a 40" curved bar.

All mounts are available in either gloss black or textured black. Please let me know if you have any additional questions and we can get you set up!

Can you fit the old school round KC lights on either of the top 2 bars? (and/or the newer LED version.)
 
OP
OP
W

WhatExit?

FRF Addict
Joined
Mar 11, 2014
Posts
1,800
Reaction score
1,211
Location
48th state
THANKS Nick, for posting these pics!

I'm very interested in one of the first two bars. But I've just sent an email to N-FAB asking them if they'll make these bars with the brackets welded to the top of the crossbars so we can mount our lights underneath the crossbar keeping them (hopefully) out of the camera's vision.

Perhaps we could even mount a cube light at the ends of the bars if those 2 locations prove to be out of the camera's vision.

I've also given them a link to this thread and told them that you were the one who posted their products here and I told them I want to buy the lightbar from you.

Let's see what they say about making a different version for us camera-crazy Raptor owners. This could be a great lightbar and the price, so far, seems to be right.

Thanks again Nick!
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
16,074
Reaction score
23,551
Yeah, I asked n-fab about camera clearance twice before I bought. Get pictures from the side before you commit.
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,391
Reaction score
3,055
Location
Houston, TX
Can you fit the old school round KC lights on either of the top 2 bars? (and/or the newer LED version.)

Yes you can! With the multi-mount setup, a variety of options are popular. This is a great solution if you have existing KC lights you'd like to transfer to your new truck.

If you need some new lights, we're a dealer for KC as well and would be happy to put a package together for you.

---------- Post added at 11:42 PM ---------- Previous post was at 11:40 PM ----------

THANKS Nick, for posting these pics!

I'm very interested in one of the first two bars. But I've just sent an email to N-FAB asking them if they'll make these bars with the brackets welded to the top of the crossbars so we can mount our lights underneath the crossbar keeping them (hopefully) out of the camera's vision.

Perhaps we could even mount a cube light at the ends of the bars if those 2 locations prove to be out of the camera's vision.

I've also given them a link to this thread and told them that you were the one who posted their products here and I told them I want to buy the lightbar from you.

Let's see what they say about making a different version for us camera-crazy Raptor owners. This could be a great lightbar and the price, so far, seems to be right.

Thanks again Nick!

I'm happy to help. Please let me know if there's anything else I can do on my end to help facilitate or if N-Fab would like me to contact them as well. Thanks!
 
OP
OP
W

WhatExit?

FRF Addict
Joined
Mar 11, 2014
Posts
1,800
Reaction score
1,211
Location
48th state
Yeah, I asked n-fab about camera clearance twice before I bought. Get pictures from the side before you commit.

Understood but all these pictures/products show the lights being mounted on top of the crossbar. I want to know if/how much the camera's vision will be blocked if the lights are mounted under the crossbar.

What did you end up buying Smurf-meister? Got pics?
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
16,074
Reaction score
23,551
http://www.fordraptorforum.com/f265/n-fab-light-bar-56995/

@WhatExit

I think that would present some challenges

if you hang lights underneath, I’m not sure you’d have the ability to adjust fully, based on the bar and bumper contour and positioning.

Though... I wonder if you could mount the bar upside down, from the bumper protrusions? it wouldn’t be positioned optimally for sure. You’re also blocking the intercooler or obstructing the license plate and the latter was a no-go for me.

if you look at the side picture in my thread, and if you were to order the bar without a top bar, you could cut some plate steel to create a “cantilever” mount for the lights, moving them closer to the grill and obstructing far less of the camera. IIRC, that bar was around $220 or so? Figure about another $100 in material and fab.

If you look at the side picture in my thread and then the camera view, you can see about how much front vision you’ll lose without the top bar and you will need to use your imagination on what the light obstructs.
 

ReefBlue

Full Access Member
Joined
Aug 8, 2016
Posts
240
Reaction score
170
Location
Delco . . .
Is there anyone on planet earth that will take a picture of the screen to show what the forward looking camera, and 360 camera sees when you install these things?
 
OP
OP
W

WhatExit?

FRF Addict
Joined
Mar 11, 2014
Posts
1,800
Reaction score
1,211
Location
48th state
In search of a better light bar (for camera-equipped trucks)

THANKS Nick, for posting these pics!

I'm very interested in one of the first two bars. But I've just sent an email to N-FAB asking them if they'll make these bars with the brackets welded to the top of the crossbars so we can mount our lights underneath the crossbar keeping them (hopefully) out of the camera's vision.

Perhaps we could even mount a cube light at the ends of the bars if those 2 locations prove to be out of the camera's vision.

I've also given them a link to this thread and told them that you were the one who posted their products here and I told them I want to buy the lightbar from you.

Let's see what they say about making a different version for us camera-crazy Raptor owners. This could be a great lightbar and the price, so far, seems to be right.

Thanks again Nick!

5255230c61f936af6eee97d5749550bf.jpg

So, I never heard from N-FAB in response to my email through their website. I figured maybe they were affected by the hurricane so I called them today. I was told no issues - they were able to stay open - so that's good.

The guy I talked to said they've not had any negative feedback on their lightbar for the Raptor / F-150. I explained that there's not a problem or issue with their light bar it's just that the light bar with an LED light bar mounted on it blocks the bottom portion of the front camera display. He seemed to have no clue about it. Just said they've not had any complaints with their light bars.

I asked him if they do customs and he said no.

That was it. No interest in understanding the challenge or the opportunity to make a better light bar for trucks with forward facing cameras. And no interest in making a custom light bar.

By the way, I did find out that you have to cut through the plastic panel(s) of the truck to install their light bar. He said it attaches to the frame and there's no hole drilling required. I assume their light bar mounts up to existing bolts but I don't know. Perhaps someone who knows about N-FAB's light bar can tell us?

I continue to look for a better LED light bar mounting solution. I think it's out there just need to figure it out and maybe buy a bar like this as a starting point and modify it. <thinking>
 
Top