Baja Designs: General Discussion Thread - GEN 2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,212
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,212

roby

Member
Joined
Sep 2, 2017
Posts
19
Reaction score
8
quick question, picked up a 40" on6x amber/led light bar. There is a wiring harness on both the left and right side of the bar. Does each side connect to a separate bulk wire for the aux switch? I didn't get any other wiring with the light so I am assuming I would cut off the weather proof clips and splice additional wiring to reach the aux bulk wiring near firewall?
 

Ironhorse07

FRF Addict
Joined
Oct 23, 2014
Posts
1,205
Reaction score
1,746
Location
Central, MT
quick question, picked up a 40" on6x amber/led light bar. There is a wiring harness on both the left and right side of the bar. Does each side connect to a separate bulk wire for the aux switch? I didn't get any other wiring with the light so I am assuming I would cut off the weather proof clips and splice additional wiring to reach the aux bulk wiring near firewall?

I've always got an instruction sheet with wiring diagram with all my BD lights. As far as wiring, buy the BD Ford upfitter harness for 14 bucks or use the weatherpack connector they sent you instead of chopping up the harness.
 

Smokeshow60

SgtMajor of the MemeCorps
Supporting Member
Joined
Sep 21, 2017
Posts
692
Reaction score
392
Location
Southern Ohio
quick question, picked up a 40" on6x amber/led light bar. There is a wiring harness on both the left and right side of the bar. Does each side connect to a separate bulk wire for the aux switch? I didn't get any other wiring with the light so I am assuming I would cut off the weather proof clips and splice additional wiring to reach the aux bulk wiring near firewall?

Sounds like you have a dual control bar... I would not cut and splice. Instead I'd get in touch with bd and get 2x upfitter connection harness. It's a 5ft wire with connectors on one end for the light and appropriate wires on the other to hook to switch wires... hope this helps.
 
D

Deleted member 12951

Guest
The dual control bar will turn on the two outside sections and the other the two inside ones, hence why there is two wires on each side. It will also come with two female ends that you can use on your own wiring to two separate AUX switches or relays or purchase the premade BD wiring harness from a FRF vendor. The wires will come with a green wire that you can run to a momentary switch to make it flash.

See video:


The authorized vendor who you purchased it from should be able to assist you on everything you need, assuming you got it from a supporting FRF vendor here....
 
OP
OP
Baja Designs

Baja Designs

Supporting Vendor
Supporting Vendor
Joined
Apr 12, 2012
Posts
1,741
Reaction score
1,212
quick question, picked up a 40" on6x amber/led light bar. There is a wiring harness on both the left and right side of the bar. Does each side connect to a separate bulk wire for the aux switch? I didn't get any other wiring with the light so I am assuming I would cut off the weather proof clips and splice additional wiring to reach the aux bulk wiring near firewall?

Thanks for posting up. You will need to purchase 2 of the following upfitter harnesses:
https://www.bajadesigns.com/products/ford-upfitter-wiring-harness-onx6-s8.asp

If you decide not to use the upfitter switches you will need two of our 640119 wiring harnesses:
https://www.bajadesigns.com/products/xl-pro-sport-wire-harness-w-mode-2-lights-max-325-watts.asp

Please let us know if you have any questions.

-Bailey, Baja Designs
www.bajadesigns.com

---------- Post added at 11:58 AM ---------- Previous post was at 11:50 AM ----------

38471972721_6061c15b97_b.jpg

Baja Designs is offering Black Friday Cash Back Rebates to retail customers that make a purchase between 11/20/2017 and 11/27/2017! Orders placed directly through Baja Designs, or through authorized dealers are both eligible. Simply place a qualifying order, fill out the rebate form and mail it back with a copy of your invoice within 30 days and we will send you a check for said value!

Mail to:
ATTN: Black Friday Rebate
185 Bosstick Blvd.
San Marcos, CA 92069

Please see the below link for more details:
https://www.bajadesigns.com/home/blackfriday.asp

Let us know if you have any questions!

-Bailey, Baja Designs
www.bajadesigns.com
 

Forum statistics

Threads
92,828
Posts
1,946,511
Members
56,082
Latest member
JTRaptor20
Top