GEN 2 10" onx6 installation behind lower grill

JDog said:

Hmmm. I need to take the front grill off to adjust it again so I'll look more closely but I don't think it can be moved at all.


Sent from my iPhone using Tapatalk

---------- Post added at 08:48 AM ---------- Previous post was at 08:47 AM ----------




Please Let me know what you find out...Thanks JDog!

Click to expand...

BajaFred said:

IIRC the 10" puts out more light?

Click to expand...

hkguns said:

I haven't been able to find specs on the 30" bar but the 10" is pretty darn bright.

Click to expand...

Baja Designs said:

Here is a quick breakdown between the OnX6 10" Hi-Power and S8 30"



OnX6 10" Hi-Power

https://www.bajadesigns.com/products/onx6-10-hi-power-driving-combo-led-light-bar.asp

Lumens: 11,650 using 6 Cree LEDs

Wattage/Amps: 101W / 8.4A



S8 30" Driving/Combo

https://www.bajadesigns.com/products/S8-30-inch-Driving-Combo-LED-Light-Bar.asp

Lumens: 12,000 using 24 Cree LEDs

Wattage/Amps: 120W / 9.99A

Click to expand...

hkguns said:

Thanks for the specs Baja! Looks like I will start with the 10" since it is almost as bright and sits lower which should be better in low viz conditions.

Since I already have your pro level fog pocket lights, would you recommend anything different?

Click to expand...

Bullishone said:

Intercooler schmintercooler.

...

Click to expand...

Grayden said:

What are your guys thoughts on how this blocks the Intercooler a bit? Nothing to be worried about seeing how it only blocks half of it?

Click to expand...

ChevTillNow said:

JDog said:

Hmmm. I need to take the front grill off to adjust it again so I'll look more closely but I don't think it can be moved at all.





Sent from my iPhone using Tapatalk



---------- Post added at 08:48 AM ---------- Previous post was at 08:47 AM ----------









Please Let me know what you find out...Thanks JDog!

Click to expand...

Finally had a chance to look again. You MIGHT be able to get another 1/2" but it'd take some drilling and messing with the bracket. I'd be leery to try. Here's some pics of it. First is from front and next two are sides showing how the light mounts and is adjustable. By the way, now that I aimed it up a bit more, it's crazy bright. Really long throw.


Sent from my iPhone using Tapatalk

Click to expand...

JDog said:

I got this installed today. It wasn't too bad. The bracket is pretty slick and you could put spacers in there easily if you wanted to make it flush mount and cut the grill. When the sun goes down we will see how bright this thing is!!


Sent from my iPhone using Tapatalk

Click to expand...