Any advice on applying graphics?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

801Ag

Full Access Member
Joined
Aug 16, 2017
Posts
71
Reaction score
44
I just ordered demon eyes, a center stripe, and for pillars from Rappy Graphics.

I am a bit nervous to try the install myself. Can anyone tell me what to expect and let me in on any tips.

Or if someone knows if a good installer in the Utah County area.

Thanks in advance!

801ag

Sent from my SM-N950U using Tapatalk
 
OP
OP
801Ag

801Ag

Full Access Member
Joined
Aug 16, 2017
Posts
71
Reaction score
44
Nothing, eh?


Sent from my iPhone using Tapatalk
 

Stang

Full Access Member
Joined
Oct 24, 2012
Posts
689
Reaction score
390
Easy peasy. There are a lot of you tube videos out there. Get yourself a good 3M hard squeegee and a bottle of Rapidtac from Amazon.

Sent from my SM-T710 using Tapatalk
 

hamster

FRF Supporting Member
Supporting Member
Joined
Mar 14, 2016
Posts
912
Reaction score
562
Location
Northern VA
And all of his are on air release paper so if get small bubbles.....let them sit for few days. Worked for me.
 
OP
OP
801Ag

801Ag

Full Access Member
Joined
Aug 16, 2017
Posts
71
Reaction score
44
Thanks for the help. My main concern is getting the stripe centered.


Sent from my iPhone using Tapatalk
 

kandewinn

Full Access Member
Joined
Mar 12, 2017
Posts
801
Reaction score
631
Thanks for the help. My main concern is getting the stripe centered.


Sent from my iPhone using Tapatalk

Cut the paper edge close to graphic, equidistant all the way around, center it, tape it to the hood with masking tape so it does not move, step back, evaluate, measure, correct, remeasure and begin application.
 
Top