Aftermarket Carbon Fiber Package?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

N

NJSP117

Full Access Member
Joined
Jun 27, 2012
Posts
344
Reaction score
142
Location
New Jersey
Installed the CF shifter (thanks Dinoone). Was an easy install and I'm surprised how much better it looks than the leather handle.
Follow the instructions posted earlier in this thread and it's a 5-10 minute install.
 
Jayrod

Jayrod

Full Access Member
Joined
May 16, 2017
Posts
829
Reaction score
382
Location
FL
marsh1 said:
It's vinyl to match the seats. You have to cut the plastic weld on the panel then epoxy back on once covered. Here are the part numbers. Figure around $600 for all three. You have to shop around. The other piece that is not shown goes above the glove box.

Handle Assembly
Part Number: HL3Z-7213-HA

Panel - Instrument
Part Number: HL3Z-1504339-AC

Panel - Instrument
Part Number: HL3Z-1504608-AC
Click to expand...



Are those three part numbers for shifter, piece above glove box and sync I'm assuming? Doors are like 900$, so no.


Sent from my iPhone using Tapatalk
 
M

marsh1

Full Access Member
Joined
Apr 12, 2017
Posts
95
Reaction score
47
Location
Houston, TX
Jayrod said:
Are those three part numbers for shifter, piece above glove box and sync I'm assuming? Doors are like 900$, so no.


Sent from my iPhone using Tapatalk
Click to expand...

Yes those do not include the doors. I didn't price out the carbon fiber door panels but you have to buy the entire door panel not just the insert. I like my upholstered ones better anyway.
 
Last edited:
R

RoushF150

Member
Joined
Aug 23, 2017
Posts
1
Reaction score
0
Has anyone installed the passenger trim on an xlt? It does not line up. There has to be a way. I have tr Trim, sync door and shifter waiting to be put on
 
2016BoostedGreyGoose

2016BoostedGreyGoose

Member
Joined
Sep 26, 2017
Posts
38
Reaction score
20
RoushF150 said:
Has anyone installed the passenger trim on an xlt? It does not line up. There has to be a way. I have tr Trim, sync door and shifter waiting to be put on
Click to expand...

I have but I also replaced my entire XLT dashboard with a Lariat. Dont ask...lol. The part that you are asking about will not fit the XLT dashboard without modification to the CF part. (not recommended)
 

Attachments

  • 20170925_115325.jpg
    20170925_115325.jpg
    100.6 KB · Views: 126
  • 20170925_180224.jpg
    20170925_180224.jpg
    97.9 KB · Views: 135
  • 20170925_180323.jpg
    20170925_180323.jpg
    96.8 KB · Views: 143
H

heffneil

Active Member
Joined
Oct 27, 2017
Posts
88
Reaction score
16
Is the light in your map pocket stock? I am curious about it. My truck comes tomorrow.

Thanks!
 
2016BoostedGreyGoose

2016BoostedGreyGoose

Member
Joined
Sep 26, 2017
Posts
38
Reaction score
20
heffneil said:
Is the light in your map pocket stock? I am curious about it. My truck comes tomorrow.

Thanks!
Click to expand...

No, my truck is a 2016 XLT Sport. I built my own oem ambient light harness and repinned the BCM to enable its function as all of yours, thru the touch screen settings. Along with all of the oem location led modules, I added a few additional...the map pockets and the inside of the rear seat handles......
 

Attachments

  • Rear Seat Ambient10.jpg
    Rear Seat Ambient10.jpg
    26.3 KB · Views: 79
  • Rear Seat Ambient11.jpg
    Rear Seat Ambient11.jpg
    33 KB · Views: 79
  • 20171212_123249.jpg
    20171212_123249.jpg
    50.1 KB · Views: 76
  • 20171212_123336.jpg
    20171212_123336.jpg
    53.5 KB · Views: 79
  • 20171212_123407.jpg
    20171212_123407.jpg
    40.6 KB · Views: 66
  • 20171212_123422.jpg
    20171212_123422.jpg
    48.4 KB · Views: 75
Last edited:
H

heffneil

Active Member
Joined
Oct 27, 2017
Posts
88
Reaction score
16
2016BoostedGreyGoose said:
No, my truck is a 2016 XLT Sport. I built my own oem ambient light haness and repinned the BCM to enable its function as all of yours, thru the touch screen settings. Along with all of the oem location led modules, I added a few additional...the map pockets and the inside of the rear seat handles......
Click to expand...

Wait did you do any write up about it anywhere? I am curious?

Thanks!
 
2016BoostedGreyGoose

2016BoostedGreyGoose

Member
Joined
Sep 26, 2017
Posts
38
Reaction score
20
No, never was good at write ups. I just dive in! lol There is a write up on how to add the oem ambient lighting though. A member on another forum, flsdiver, did a really nice write up.
 
F

Finnster

Full Access Member
Joined
Apr 6, 2017
Posts
50
Reaction score
12
Location
Ashburn, VA
2016BoostedGreyGoose said:
I have but I also replaced my entire XLT dashboard with a Lariat. Dont ask...lol. The part that you are asking about will not fit the XLT dashboard without modification to the CF part. (not recommended)
Click to expand...


Does the dash trim piece just attach via double sided tape to the existing panel or do you remove the original and replace it with the carbon piece?
 

Similar threads

gmdjr21
Orange interior and carbon wheel
Replies
0
Views
342
gmdjr21
gmdjr21
JD MIDNIGHT
Carbon package ford performance
2 3
Replies
20
Views
2K
MZRaptor72
MZRaptor72
T
Cobb Carbon Fiber Cold Air Intake, Brand New
Replies
0
Views
412
Tact34
T
A
New Azure gray 37 being picked up Friday
2
Replies
19
Views
1K
MurderedOutSVT
MurderedOutSVT
Antho
Ford Performance Carbon Fiber Kit
2 3
Replies
27
Views
5K
Nex
Nex

Staff online

Members online

... and 32 more.
Total: 1,739 (members: 82, guests: 1,657)

Forum statistics

Threads
93,169
Posts
1,955,223
Members
56,440
Latest member
jumpcutter

Latest posts

Top