What do you think of this NEW wheel by BMF?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Greybeard

Full Access Member
Joined
Sep 8, 2014
Posts
491
Reaction score
148
Lot of guys in the rock crawling world use 20" bead locks but my personal preference is 17" wheels. The extra sidewall means everything
 

SuperRaptor

Full Access Member
Joined
Apr 13, 2011
Posts
780
Reaction score
145
Location
Seattle
20's aren't as bad as everybody makes them seem. You won't bend a wheel if you hit a pebble, and your truck won't ride like a civic with chopped springs. There are off road disadvantages but people tend to over exaggerate quite a bit. When I had a Tacoma many years ago the members on that forum were the same way "20's can't go off road" etc. One guy had 20's and 33's and he constantly beat on them and never had any issues. Was it the best tire for the job? No. Did he still do more off road than me and my 17's? YES

So I say get what you like. But FYI I distribute BMF and many of their wheels are fairly light but this is not one. This wheel weighs 45lbs

Here is the Tacoma member mentioned above
https://www.youtube.com/watch?v=rfCDZMet44c&index=65&list=UU8WPn0Ka8xWfIQkveACmXiw

https://www.youtube.com/watch?v=rfCDZMet44c&index=65&list=UU8WPn0Ka8xWfIQkveACmXiw

https://www.youtube.com/watch?v=nMQ0oD15eJA&list=UU8WPn0Ka8xWfIQkveACmXiw

And here Fuel is testing their original Mud Gripper Tire (size 35x12.50R20's) on a long travel Tundra
https://www.youtube.com/watch?v=H-QJcEkXtO4

I've ran 20's and 35's on my F350 for years towing/hauling and gone through a lot of rough places loaded down and never had any problems. Of course I'm not jumping it but everyone gets a little too high on their horses about the bigger rims/offroading.
 
Top