4 The Truck Ford Raptor Off-Road Front and Rear Bumper

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

4thetruck

Supporting Vendor
Supporting Vendor
Joined
Dec 5, 2012
Posts
112
Reaction score
25
Location
Henderson, NV
4 The Truck Ford Raptor Off-Road Front and Rear Bumper

http://www.4thetruck.net/off-road-corner/ford-svt-raptor.html

Use Promo Code: "SVT4TT" to take $150 off a pair of bumpers or Promo Code: "Raptor4TT" to take $50 off a single bumper.

4TTBumpers-21_zpse79f5968.jpg
4TTBumpers-25_zps4e8ccbbd.jpg
4TTBumpers-26_zps4af5eb1d.jpg

Rear 4TT Bumper Pictures
4TTBumpers-36_zpsb5df180c.jpg
4TTBumpers-34_zpscd6cf5dc.jpg
4TTBumpers-41_zpsb49c558e.jpg

The New 4TT Off Road Bumpers is the toughest bumper you can buy for your Ford Raptor. Our bumper fitment is set to factory standards and has the tightest specs you will find in the aftermarket industry. Our 4TT Off-road Bumpers are constructed from .120 wall mild steel tubing. The frame horn mounts are fully boxed out of 3/8 inch steel, the skid plate and skins are laser cut for a precise fit. All of the skins are bead rolled to ensure an exact fit. Our expert welders fabricate each bumper to an exact fixture specification so you can be assured of simple bolt-on installation.

The 4TT bumpers are coated with Line-X premium polyurea fine texture. This new flat tip high pressure spray technology produces a hammered powder coat look, which will save the bumper from rock chips unlike powder coating! (Custom colors available for an additional charge)

- One-piece welded design
- Lifetime Warranty on product and 5 year warranty on finish
- Made in the USA
- Designed to hold Vision-X or Rigid Industries 20" LED light bar
- Optional winch mount is designed for 12000 lb. winches or smaller
- Front bumper Length: 86" Height: 16" Width: 5" Weight: 93.8 lbs.
- Rear bumper length: 76” Height: 9” Width: 10” Weight: 68 lbs.
- Application: 2009-current Ford Raptor

Common Questions asked regarding our bumpers:
-Are your bumpers built in house or shipped from another warehouse?
-Yes, our bumpers have been completely designed and fabricated in-house. Therefore the turnaround time after ordering is within a day or two.
-Does your bumper offer a better approach angle than factory, if so, how much?
-Yes, our bumper increases the approach angle by about 5” in the front
-Can you color match the bumper with Line-X to the exterior color of the Raptor?
-Yes, we can color match the bumper to the exact color of your Raptor with the Line-X for an additional $200.
-Is there any cutting or extra fabricating to do for bumper fitment?
-There is no cutting involved. Our bumpers are direct bolt-on.
-Are the factory tow hooks still completely usable?
-Yes, the factory tow hooks are completely usable with our bumper installed.
-Will your bumpers fit all years for the Ford Raptor?
-Yes, our bumper will fit all years on the Ford Raptor
-Will the factory cameras (front and rear) and license plate work with our bumper?
-Yes, the factory cameras both front and rear will still work with our bumper. There are skins that can made to accommodate back-up sensors as well. The license plate light will still work with the 4TT rear bumper.
-Will the airbags still work with this bumper?
-Yes, the airbags will still work with our bumper
-How much further does the 4TT bumper stick out than the factory bumper?
-The front bumper has a tube in the center of our 4TT bumper that brings it out about 3” further than the stock bumper. As for the rear bumper, it extends about 3” from the factory bumper.
-Can the 4TT logo be omitted?
-The 4TT logo can be omitted for $100 and we can also do any custom cut out for an additional cost depending on the design or logo.

If anyone has any further questions or concerns, please feel free to contact me.

Thanks,
Aaron Klock
Sales
4 THE TRUCK CUSTOMS & ACCESSORIES
7585 Commercial Way Ste. A
Henderson, NV 89011
(702) 434-9274
e: [email protected]
w: Home - 4 The Truck Customs & Accessories in Las Vegas 4 The Truck
Like Us on FaceBook!
 
Last edited:

Pynenut

Full Access Member
Joined
Jul 5, 2012
Posts
702
Reaction score
148
Location
Las Vegas, NV
Hey Aaron. I stopped by your shop a few weeks ago and took a look at the Raptor out front. Looks great! I'll be in touch after I get my tax return! Nice to have a local shop in Vegas. --George
 
OP
OP
4

4thetruck

Supporting Vendor
Supporting Vendor
Joined
Dec 5, 2012
Posts
112
Reaction score
25
Location
Henderson, NV
Thanks, Yes our guys have spent countless hours getting that bumper to fit perfectly! We take a lot of pride in making sure everything regarding those bumpers keeps our raptor enthusiasts stoked!

George - Glad you were able to make the trip over here. I look forward to meeting you next time you make it over to the shop.
 

Hockster

My 45ft Bluewater Party
Supporting Member
Joined
Aug 9, 2010
Posts
5,142
Reaction score
1,871
Location
Winchester, Va
Not criticizing your bumpers they look great just, was wondering why you and so many others do not try to follow the contour of the front fascia? Is it not possible to do it without looking weird?
 
OP
OP
4

4thetruck

Supporting Vendor
Supporting Vendor
Joined
Dec 5, 2012
Posts
112
Reaction score
25
Location
Henderson, NV
Not criticizing your bumpers they look great just, was wondering why you and so many others do not try to follow the contour of the front fascia? Is it not possible to do it without looking weird?

In terms of contour, are you looking for more slight bends in the tube to follow the valence all the way around corner to corner?
 

Hockster

My 45ft Bluewater Party
Supporting Member
Joined
Aug 9, 2010
Posts
5,142
Reaction score
1,871
Location
Winchester, Va
In terms of contour, are you looking for more slight bends in the tube to follow the valence all the way around corner to corner?

Ya the round look instead of the 2 bends at teh corners and the straight area in front. I can see the straight area if you were installing light on the top of the bumper... Just curious about it. I do think your bumpers look great too!!!
 
Top