Raptor bumpers now in stock !!!

Baldwin, that has to be one of the funniest SNL skits ever!

BIRDMAN said:

is anyone considering the front bumper?

Click to expand...

It's definitely on my consideration list. Hoping for some more pics from different angles.

Baldwin09 said:

Yes when I have the cash lol anyone wanna loan me some


Sent from my iPhone using Tapatalk

Click to expand...

i found your guy

http://www.fordraptorforum.com/f93/can-i-afford-raptor-15292/

BIRDMAN said:

i found your guy

http://www.fordraptorforum.com/f93/can-i-afford-raptor-15292/

Click to expand...

I'll see if he will give me an application lol


Sent from my iPhone using Tapatalk

does the front bumper require any cutting/trimming? is it completely bolt on?

It requires only 1 hole on each side for the brace, an easy install overall. i had them weld on some light tabs because i prefer 8" HID rounds and I went with the hidden winch set-up, most go with the LED's there. Here's a few pics. Note...I havn't powder coated yet because I'm waiting to finish the custom chase cage & do both at the same time. Also I know these people they will treat u right!

bumper W/ winch & light tabs

BIRDMAN said:

so is that the same design from the SEMA truck? do you have more/better pictures?

Click to expand...

Yes, this is the same bumper we put on the WD-40 F-150 Raptor Conversion Truck. As for more pictures, you ask, I deliver.

vanilla_gorilla said:

So it looks like a 30 inch light bar on the front bumper, is there a way to fit a 20 incher in, and recess it back for more protection?

Looks good BTW!

Click to expand...

If you can see, behind the 30" bar, there is a cut out, meant for winch access. However is is 21" at the bottom, then starts to taper off to about 19". It will be a tight fit, and some brands that mount on the sides, like a Rigid, may not work, so it all depends on your set-up and what you are going to run. If you scroll down and look at the silver raptor, that will give you the best picture of what I'm talking about.

NickPic83 said:

does the front bumper require any cutting/trimming? is it completely bolt on?

Click to expand...

RivRaptor knows the routine . Yup, all you need to do is drill a hole on each side for the brace, which can be done with a standard drill. No trimming required at all and just bolt on!

On a side note, we will be open saturday Dec 21 and 28 from 10-2 , open on Dec 24th from 8-12, and closed Dec 25th, 30th, 31st, and Jan 1st.











We also had a Bronco we placed some of the same Baja style bumpers on.

I havent seen an answer yet to an earlier asked question. Is that rear finish panel part of the rear bumper package or is that something extra?

Sent from my XT1080 using Tapatalk

Also does the front bumper have a support for the center of the panel under the grill by the hood latch like the stock one does?

Sent from my XT1080 using Tapatalk