NickPic83
FRF Addict
Go away!
Sent from my DROID RAZR using Tapatalk 2
Sent from my DROID RAZR using Tapatalk 2
6.2 Roush S/C Raptor.
- Thread starter Stealthf1
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Fixt.
OP
OP
Stealthf1
Full Access Member
Roush Supercharged Raptor 1/4 Mile Run. - YouTube
A quick vid from when I was able to make it to the track this past Sunday,
I was able to only make 2 passes due to a wreck right before closing time. Luckily
my buddy caught the 13.4 pass. Wish I had a few more runs to play around
dial things in a bit more.
Roush Performance Proven
A quick vid from when I was able to make it to the track this past Sunday,
I was able to only make 2 passes due to a wreck right before closing time. Luckily
my buddy caught the 13.4 pass. Wish I had a few more runs to play around
dial things in a bit more.
Roush Performance Proven
Attachments
MTF
FRF Addict
I have to say 13.49 is nothing to sneeze at. StangHi did a great job with the Tune.
Better than Roush's 590 fwhp kit.
What pulley size are you running?
And what Headers and exhaust are you running? Sounds like open headers. LOL nice!!!
I think I remember, you have the cut-out yes?
Better than Roush's 590 fwhp kit.
What pulley size are you running?
And what Headers and exhaust are you running? Sounds like open headers. LOL nice!!!
I think I remember, you have the cut-out yes?
Last edited:
NickPic83
FRF Addict
nice time. what exhaust is that??
WHYUMAD
Full Access Member
When I put on the procharger we should run at No Problem sometime.
OP
OP
Stealthf1
Full Access Member
Yeah, it's def a decent time for our trucks, Thanks MTF.
Hey did you ever get a chance to take your truck to the track?
I'm running the 75 pulley with the upgrade from Roush,
as for the exhaust its Stainless works headers offroad config
matched to a dual set of their s-tube exhaust system. No cutouts.
Whyumad, sure can and just let me know when your trucks ready
and give me a shout.
Hey did you ever get a chance to take your truck to the track?
I'm running the 75 pulley with the upgrade from Roush,
as for the exhaust its Stainless works headers offroad config
matched to a dual set of their s-tube exhaust system. No cutouts.
Whyumad, sure can and just let me know when your trucks ready
and give me a shout.
MTF
FRF Addict
I never saw you ask me about the track.
I'm a little late, but no. LMAF
I'm still all stock, no headers, stock exhaust, standard pulley. Just the upgraded HE with fans.
I'm a little late, but no. LMAF
I'm still all stock, no headers, stock exhaust, standard pulley. Just the upgraded HE with fans.
Last edited:
OP
OP
Stealthf1
Full Access Member
It's ok buddy.
Yeah, I'm running a smaller pulley now had a set fabbed up and that new tune I had mentioned. Hell I've never been able to get back to the track since that last run posted.
Yeah, I'm running a smaller pulley now had a set fabbed up and that new tune I had mentioned. Hell I've never been able to get back to the track since that last run posted.
6.2Canadian
Full Access Member
Are you running a 72mm pulley? and if so what is your boost level at with headers?
I took your advice a while back and ordered codys tune and a 72mm pulley along with the larger heat exchanger.. I have just the regular f150 too so she pulls hard!
