Ford Raptor How-To's and FAQs Paint rear emblems
This is a discussion on Paint rear emblems within the Ford Raptor How-To's and FAQs forums, part of the Ford Raptor Forums - General Information category!
Register to remove these ads. It's free!
Ditto.. Cause i am thinking about totally debadging my Raptor with the exception ...
|
 6Likes
10-17-2012, 11:08 AM
|
#11 (permalink)
|
|
FRF Addict
Join Date: Jun 2011
Location: Kansas City, MO
Posts: 8,602
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Register to remove these ads. It's free!
Ditto.. Cause i am thinking about totally debadging my Raptor with the exception of F150 (which I am going to plastidip it) just in case i change my mind
-Greg
|
|
|
|
|
10-17-2012, 11:20 AM
|
#12 (permalink)
|
|
Administrator
Join Date: Jul 2010
Location: Chihuahuan Desert (EPTX)
Age: 32
Posts: 6,726
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
The emblems are easy to remove, the Raptor emblem is affixed with adhesive only, whereas the F-150 has a couple of posts that lineup with holes in the tailgate. To remove them I recommend goof off, dental floss, and a stiff plastic flat-edge tool (or a thin metal scraper carefully wrapped in painter's tape would work).
I haven't painted mine, but I did remove the F-150 badge and then relocated the Raptor badge to the driver's side to cover the alignment holes.
I did however LineX the bezel on the Ford emblem yesterday (plasti dip didn't cut it for me, kept peeling)... I like how it came out.
|
__________________
I Get Dirty at FordRaptorForum.com  2010 6.2L | Custom Gold Zinc-Plated Fox 3.0 Shocks & 2.5 Bumpstops | white RPG Stage 4+ | white RPG Raceline 1.5" UCAs | Custom ADD Stealth Front Bumper | Rigid Industries LEDs (White 40" & Amber 40") | VisionX 4502 Spot HIDs on Outlaw Hood Mounts | Deaver +2" Rear Leaf Springs | 17" Method Double Standards | 37" BFG KM2s | Matte Black 3M Vinyl | white Baja Coyote Chase Rack | 20% 3M Tint Everywhere + Eyebrow | RPG Tie Rods Anodized In Gold | WeatherTech Liners & Shades | RPG Power Steering Reservoir Anodized In Gold | CravenSpeed Stubby | ADD ABS Sensor Guards | White & Black Emblems | Magnaflow Race Muffler Dumped To Hidden Black RBP Tip | White PCP Spider Rock Guard on Rear Diff. | Swaybar Delete | Glassworks Unlimited Front Fenders | ColorMatched Rear Flares | Oxford White Sideview Reflectors | Escort 5900ci PassPort with GPS, Laser Shifters, & Hidden Install | Viper 5902 w/ Remote Start, Tilt Sensors, Killswitch, & LCD Remote | Custom Black TX Plates | Raptor Retrofit Headlights (Blacked-Out w/ White Shrouds & Amber Evil Eyes) | Recon Smoked Taillights w/ SuperBright LED's Reverse Bulbs | Crow Enterprizes Harness Pads | Black Line X Premium on Bed, Wheelwells, & Tailgate Emblem Bezel | VIAIR 450P Air Compressor w/ ADD Mount Behind Grille | aFe Stage II CAI | 5star 91 Octane Performance Tune | SDHQ Braided Steel Brakelines
|
|
|
|
|
10-17-2012, 11:42 AM
|
#13 (permalink)
|
|
FRF Supporting Member
Join Date: Sep 2011
Location: Richmond, VA
Posts: 7,248
Mentioned: 5 Post(s)
Tagged: 1 Thread(s)
|
The white and black emblem looks great on the white truck...that is awesome...the blacked out chrome looks good too...
|
__________________
|
|
|
|
|
10-17-2012, 12:22 PM
|
#14 (permalink)
|
|
Administrator
Join Date: Jul 2010
Location: Chihuahuan Desert (EPTX)
Age: 32
Posts: 6,726
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Originally Posted by Fred
The white and black emblem looks great on the white truck...that is awesome...the blacked out chrome looks good too...
|
Thanks man. I know the edging where the LineX meets the white decal looks a lil shaky, but it's not. Those are areas where the decal got a bit jacked up during edging in previous plasti dip trials. I'm gonna replace the white decal to clean up that edge... Can't decide if I'm gonna do the same thing or do an SVT logo.... But I'll probably end up doing an FRF logo there since that's what would be the illest.
The original poster's idea and photos have me thinking about doing a lil somethin-somethin with the Raptor and 6.2L badges. Hmmmmm....
|
__________________
I Get Dirty at FordRaptorForum.com 2010 6.2L | Custom Gold Zinc-Plated Fox 3.0 Shocks & 2.5 Bumpstops | white RPG Stage 4+ | white RPG Raceline 1.5" UCAs | Custom ADD Stealth Front Bumper | Rigid Industries LEDs (White 40" & Amber 40") | VisionX 4502 Spot HIDs on Outlaw Hood Mounts | Deaver +2" Rear Leaf Springs | 17" Method Double Standards | 37" BFG KM2s | Matte Black 3M Vinyl | white Baja Coyote Chase Rack | 20% 3M Tint Everywhere + Eyebrow | RPG Tie Rods Anodized In Gold | WeatherTech Liners & Shades | RPG Power Steering Reservoir Anodized In Gold | CravenSpeed Stubby | ADD ABS Sensor Guards | White & Black Emblems | Magnaflow Race Muffler Dumped To Hidden Black RBP Tip | White PCP Spider Rock Guard on Rear Diff. | Swaybar Delete | Glassworks Unlimited Front Fenders | ColorMatched Rear Flares | Oxford White Sideview Reflectors | Escort 5900ci PassPort with GPS, Laser Shifters, & Hidden Install | Viper 5902 w/ Remote Start, Tilt Sensors, Killswitch, & LCD Remote | Custom Black TX Plates | Raptor Retrofit Headlights (Blacked-Out w/ White Shrouds & Amber Evil Eyes) | Recon Smoked Taillights w/ SuperBright LED's Reverse Bulbs | Crow Enterprizes Harness Pads | Black Line X Premium on Bed, Wheelwells, & Tailgate Emblem Bezel | VIAIR 450P Air Compressor w/ ADD Mount Behind Grille | aFe Stage II CAI | 5star 91 Octane Performance Tune | SDHQ Braided Steel Brakelines
|
|
|
|
|
10-17-2012, 12:59 PM
|
#15 (permalink)
|
|
FRF Supporting Member
Join Date: Sep 2011
Location: Richmond, VA
Posts: 7,248
Mentioned: 5 Post(s)
Tagged: 1 Thread(s)
|
Originally Posted by BOJANGLES
Thanks man. I know the edging where the LineX meets the white decal looks a lil shaky, but it's not. Those are areas where the decal got a bit jacked up during edging in previous plasti dip trials. I'm gonna replace the white decal to clean up that edge... Can't decide if I'm gonna do the same thing or do an SVT logo.... But I'll probably end up doing an FRF logo there since that's what would be the illest.
The original poster's idea and photos have me thinking about doing a lil somethin-somethin with the Raptor and 6.2L badges. Hmmmmm.... |
I was thinking about ordering a few extras...since I will screw up at least once and the pressure is off...if you posted earlier, i apologize for being to lazy to look, but do you think, I could get the "Ford" emblem like yours except get silver instead of white?
Nick used the Plastidip on his Chrome and his looks good...he also blacked out the tail lights and that looks sick on the silver
I was going to plasti dip the Rapptor SVT badge and see how that looks...might look good on the silver and white...
|
__________________
|
|
|
|
|
10-17-2012, 01:35 PM
|
#16 (permalink)
|
|
Full Access Member
Join Date: Oct 2012
Location: Texas
Age: 33
Posts: 489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Ok, so I read how to take them off, but what did you guys use (if anything) to put them back on?
|
__________________
Lord, make me fast and accurate. Let my aim be true and my hand faster than those who would seek to destroy me. Grant me victory over my foes and those that wish to do harm to me and mine. Let not my last thought be - If I only had a gun; and Lord if today is truly the day that you call me home, let me die in a pile of empty brass. AMEN
|
|
|
|
|
10-17-2012, 01:47 PM
|
#17 (permalink)
|
|
Administrator
Join Date: Jul 2010
Location: Chihuahuan Desert (EPTX)
Age: 32
Posts: 6,726
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Originally Posted by Fred
but do you think, I could get the "Ford" emblem like yours except get silver instead of white?
|
Yeah dude, do it up. You certainly don't need my permission. It will look good if you can get the vinyl guy to accurately match the Ingot Silver
|
__________________
I Get Dirty at FordRaptorForum.com 2010 6.2L | Custom Gold Zinc-Plated Fox 3.0 Shocks & 2.5 Bumpstops | white RPG Stage 4+ | white RPG Raceline 1.5" UCAs | Custom ADD Stealth Front Bumper | Rigid Industries LEDs (White 40" & Amber 40") | VisionX 4502 Spot HIDs on Outlaw Hood Mounts | Deaver +2" Rear Leaf Springs | 17" Method Double Standards | 37" BFG KM2s | Matte Black 3M Vinyl | white Baja Coyote Chase Rack | 20% 3M Tint Everywhere + Eyebrow | RPG Tie Rods Anodized In Gold | WeatherTech Liners & Shades | RPG Power Steering Reservoir Anodized In Gold | CravenSpeed Stubby | ADD ABS Sensor Guards | White & Black Emblems | Magnaflow Race Muffler Dumped To Hidden Black RBP Tip | White PCP Spider Rock Guard on Rear Diff. | Swaybar Delete | Glassworks Unlimited Front Fenders | ColorMatched Rear Flares | Oxford White Sideview Reflectors | Escort 5900ci PassPort with GPS, Laser Shifters, & Hidden Install | Viper 5902 w/ Remote Start, Tilt Sensors, Killswitch, & LCD Remote | Custom Black TX Plates | Raptor Retrofit Headlights (Blacked-Out w/ White Shrouds & Amber Evil Eyes) | Recon Smoked Taillights w/ SuperBright LED's Reverse Bulbs | Crow Enterprizes Harness Pads | Black Line X Premium on Bed, Wheelwells, & Tailgate Emblem Bezel | VIAIR 450P Air Compressor w/ ADD Mount Behind Grille | aFe Stage II CAI | 5star 91 Octane Performance Tune | SDHQ Braided Steel Brakelines
|
|
|
|
|
10-17-2012, 02:01 PM
|
#18 (permalink)
|
|
Administrator
Join Date: Jul 2010
Location: Chihuahuan Desert (EPTX)
Age: 32
Posts: 6,726
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Originally Posted by Killjohnathan
Ok, so I read how to take them off, but what did you guys use (if anything) to put them back on?
|
I used "3M Super Strong Automotive Attachment Tape"
http://www.autogeek.net/3m-auto-tape.html
Get a really sharp razor blade (the "box cutter" kind) and that stuff... You'll be good to go. You clean the back of the emblem really good with Goof Off to get all the previous adhesive off the emblem. The tape is double-sided so you peel off one side, affix it to the emblem, then use the blade to shave off all the excess tape off (you're basically tracing the raptor logo from the backside). Then peel off the tailgate-contacting side of the tape and firmly press it on.
The stuff is very strong. Your emblem won't come off unless its removed deliberately.
|
__________________
I Get Dirty at FordRaptorForum.com 2010 6.2L | Custom Gold Zinc-Plated Fox 3.0 Shocks & 2.5 Bumpstops | white RPG Stage 4+ | white RPG Raceline 1.5" UCAs | Custom ADD Stealth Front Bumper | Rigid Industries LEDs (White 40" & Amber 40") | VisionX 4502 Spot HIDs on Outlaw Hood Mounts | Deaver +2" Rear Leaf Springs | 17" Method Double Standards | 37" BFG KM2s | Matte Black 3M Vinyl | white Baja Coyote Chase Rack | 20% 3M Tint Everywhere + Eyebrow | RPG Tie Rods Anodized In Gold | WeatherTech Liners & Shades | RPG Power Steering Reservoir Anodized In Gold | CravenSpeed Stubby | ADD ABS Sensor Guards | White & Black Emblems | Magnaflow Race Muffler Dumped To Hidden Black RBP Tip | White PCP Spider Rock Guard on Rear Diff. | Swaybar Delete | Glassworks Unlimited Front Fenders | ColorMatched Rear Flares | Oxford White Sideview Reflectors | Escort 5900ci PassPort with GPS, Laser Shifters, & Hidden Install | Viper 5902 w/ Remote Start, Tilt Sensors, Killswitch, & LCD Remote | Custom Black TX Plates | Raptor Retrofit Headlights (Blacked-Out w/ White Shrouds & Amber Evil Eyes) | Recon Smoked Taillights w/ SuperBright LED's Reverse Bulbs | Crow Enterprizes Harness Pads | Black Line X Premium on Bed, Wheelwells, & Tailgate Emblem Bezel | VIAIR 450P Air Compressor w/ ADD Mount Behind Grille | aFe Stage II CAI | 5star 91 Octane Performance Tune | SDHQ Braided Steel Brakelines
|
|
|
|
|
02-25-2013, 03:43 PM
|
#19 (permalink)
|
|
Member
Join Date: Jan 2013
Location: San Diego
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
very cool... I am going to try that... I removed the Raptor Badge on tailgate... too many
|
|
|
|
|
|
|
06-25-2013, 12:17 AM
|
#20 (permalink)
|
|
Full Access Member
Join Date: Jul 2012
Location: Phoenix, AZ
Age: 27
Posts: 241
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Register to remove these ads. It's free!
If you want to paint emblems a gloss color, cleat coat them. The first time i did not and after 6 months they faded. Hard to tell in the picture, but the gloss is gone and the red lightened on the raptor. The F-150 is freshly painted.
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
