Bigeffr
Full Access Member
Does mod this also cut off the driving lights when the high beams are turned on?
How To Install F150 Headlight Switch fog / driving lights
- Thread starter SVT_4X4
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Blind1
FRF Addict
Nice Mod and a Super Write-Up!
OP
OP
SVT_4X4
Full Access Member
These stay on with the high beams.
I was poking around underneath mine the other day and found a wiring
harness on the driver's side by the front end with the receptacle covered
by a plug in cap. I was wondering if that was for fog lights?
OP
OP
SVT_4X4
Full Access Member
I doubt it. Did it look like a regular cap, or have a piece on the cap? I think the temperature probe is up in that area.
MagicMtnDan
FRF Addict
This is a terrific mod and write-up!
THANK YOU for taking time to share this with your fellow Raptor and forum-ites!
THANK YOU for taking time to share this with your fellow Raptor and forum-ites!
ramx50
Full Access Member
When you find out what it is let us know...
I asked the service manager at the dealership - told me to take a photo
of it, and he'll try and find out.
It's not the temp probe. It's a cap over a plug that looks like you could
plug fog lights into. Stay tuned, I'll find out.
Blind1
FRF Addict
Hawk how about posting the Pic on here......
Bigeffr
Full Access Member
Does anyone have the switch part number? Also is the 2012 switch the same as the 2013?
Similar threads
