Go Back   FORD RAPTOR FORUM - Ford SVT Raptor Forums - Ford Raptor > Ford Raptor Forums - General Information > Ford Raptor How-To's and FAQs
Become a Supporting Member         Become a Supporting Vendor

Register to remove these ads.


Ford Raptor How-To's and FAQs

ˇMás! Factory Upfitters & Easy Access wiring!!


This is a discussion on ˇMás! Factory Upfitters & Easy Access wiring!! within the Ford Raptor How-To's and FAQs forums, part of the Ford Raptor Forums - General Information category!
Thanks for the write up @ Sitdown , and thanks @ Kmandoske for the relay panel. Worked ou nicely....


User Tag List

Like Tree64Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 02-17-2015, 09:55 PM   #81 (permalink)
 
Crikk's Avatar
Full Access Member

 
Join Date: Jan 2013
Location: Crystal lake il
Age: 33
Posts: 538
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)

Default
Thanks for the write up @Sitdown, and thanks @Kmandoske for the relay panel. Worked ou nicely.














__________________
1st Rap =2010 tux black 6.2~modded, beat and burned
2nd rap= 2013 Oxford screw, all opts, whippled, method NVs w/Toyos, icon bumps, mid perch, G-bros coils, deavers, SW long tubes, corsa extreme, SVC's F/R, BD bars, hood cannons, tints, rollX tonneau, air horns, line-X'ed stuff.

Last edited by Crikk; 02-17-2015 at 09:57 PM.
Crikk is offline   Reply With Quote
Old 02-18-2015, 03:51 AM   #82 (permalink)
 
Fellow's Avatar
Full Access Member

 
Join Date: Mar 2013
Location: Middle East
Posts: 286
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)

Default ˇMás! Factory Upfitters & Easy Access wiring!!
@Sitdown; Just saying WOW!

Question, how were you able to do all this great work and your username is @Sitdown? LOL.


__________________
F-150 SVT Raptor | Race Red | SuperCrew | 2013

Last edited by Fellow; 02-18-2015 at 04:08 AM.
Fellow is offline   Reply With Quote
Old 02-18-2015, 10:01 AM   #83 (permalink)
Banned

 
Join Date: Sep 2014
Location: IL
Posts: 12,362
Mentioned: 1100 Post(s)
Tagged: 1 Thread(s)

Default
Originally Posted by Fellow View Post
@Sitdown; Just saying WOW!

Question, how were you able to do all this great work and your username is @Sitdown? LOL.
You'd think he's always sitting down, but he's just short.
Sitdown and Fellow like this.
Jimbo is offline   Reply With Quote
Old 02-18-2015, 11:54 AM   #84 (permalink)
 
Fellow's Avatar
Full Access Member

 
Join Date: Mar 2013
Location: Middle East
Posts: 286
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)

Default
Originally Posted by Jimbo View Post
You'd think he's always sitting down, but he's just short.

Very funny, LOL.


__________________
F-150 SVT Raptor | Race Red | SuperCrew | 2013
Fellow is offline   Reply With Quote
Old 02-18-2015, 03:01 PM   #85 (permalink)
 
Sitdown's Avatar
FRF Supporting Member

 
Join Date: Oct 2012
Location: Suburbia, IL
Posts: 1,475
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)

(Thread Starter)
Default
Great work John, you did in one day what took me a week
Sitdown is offline   Reply With Quote
Old 02-18-2015, 10:46 PM   #86 (permalink)
 
J DAMAGE's Avatar
Full Access Member

 
Join Date: Jul 2012
Location: NJ
Age: 48
Posts: 745
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)

Default
Originally Posted by Sitdown View Post
Great work John, you did in one day what took me a week
Hey my 8-gang set up took me a week, thanks to usps,and me adding to it, all the other work was easy, just had to follow your hard work, made it easy for the rest of us.
Sitdown here's my new terminal block that Im putting in place of all the terminal strips, they are called Double din terminal blocks, total of 12, the top half is for each switch power wires, and the lower section, uses 12 jumpers that are connected to ground the whole lower half, only need to run one ground out of box to chassis ground, there 35amp, 600v.
Attached Thumbnails
double-din-terminal-blocks.jpg   double-din-close-up.jpg   double-din-end-plate.jpg  

din-rail-terminal-locks.jpg   din-jumpers.jpg   din-mounting-rail.jpg  

double-din-mounted-rail.jpg   double-din-assem-1.jpg   double-din-assem-2.jpg  

double-din-assem-jumpers-installed.jpg  
Sitdown and carlschmarl2 like this.

Last edited by J DAMAGE; 02-18-2015 at 11:07 PM.
J DAMAGE is offline   Reply With Quote
Old 02-22-2015, 07:04 PM   #87 (permalink)
 
Crikk's Avatar
Full Access Member

 
Join Date: Jan 2013
Location: Crystal lake il
Age: 33
Posts: 538
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)

Default
Here is how I did mine. I got the "project box" and the 8 circuit distribution blocks, 2 of them, at my local radio shack. Made a bracket for the box and ran all the wires to it. What a P.I.A. Glad its all Dr one tjough. And after all is done i have 1 extra switch! Hummmmmm









dataustin likes this.


__________________
1st Rap =2010 tux black 6.2~modded, beat and burned
2nd rap= 2013 Oxford screw, all opts, whippled, method NVs w/Toyos, icon bumps, mid perch, G-bros coils, deavers, SW long tubes, corsa extreme, SVC's F/R, BD bars, hood cannons, tints, rollX tonneau, air horns, line-X'ed stuff.
Crikk is offline   Reply With Quote
Old 06-27-2016, 12:45 PM   #88 (permalink)
 
Sitdown's Avatar
FRF Supporting Member

 
Join Date: Oct 2012
Location: Suburbia, IL
Posts: 1,475
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)

(Thread Starter)
Default
That bigger box is awesome John, beefier bracket too! Great revision

My entire setup is available, if anyone is interested shoot me a PM. Complete setup, relay panel, all wiring, junction-box and dash-panel with switch block.
Sitdown is offline   Reply With Quote
Old 05-24-2017, 11:06 AM   #89 (permalink)
 
Hole Shot's Avatar
FRF Addict

 
Join Date: Nov 2013
Location: Raeford, Nc.
Age: 39
Posts: 1,623
Mentioned: 213 Post(s)
Tagged: 3 Thread(s)

Default
Great write up. I'm outta switches time for more power!!
Hole Shot is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Easy fuel not so easy! vince7870 Ford Raptor Problems and Questions Forum 14 08-06-2013 11:52 AM
Upfitters captainphx Ford SVT Raptor General Discussions [GEN 1] 6 01-04-2013 10:51 PM
Dee zee easy down STUTIDE Ford Raptor Exterior Modifications Forum [GEN 1] 38 05-18-2012 06:07 PM
Easy entry seat nold Ford SVT Raptor General Discussions [GEN 1] 19 04-10-2012 05:07 AM
Easy in cab tap for 12v non-switched? BigJ Ford Raptor Audio/Video/Electronics Forum [GEN 1] 22 03-07-2012 06:13 PM



GM Truck Forum
Chevy Tahoe Forum
Dodge Ram Forum
Chevy Cobalt Forum
Chevy Tahoe Forum
FJ Cruiser Forum
Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Ford Expedition Forum
Chevy Equinox Forum
Chevy Cruze Forum
Jeep Liberty Forum
Jeep Forum
Dodge Ram SRT10 Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum
Dodge Challenger Forum
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Land Rover Forum
Scion FR-S Forum
TRD Forum
Central US Mopars
Southeast Mopars
Cadillac CTS Forum
Oklahoma Dodge Ram Club
Softball Forum