Upfitter Switch Cutout Control - 1 Option

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ogdobber

FRF Addict
Joined
Feb 9, 2017
Posts
1,154
Reaction score
1,553
@ogbobber Im really interested in trying to make one of these but have 0 experience with wiring. Which exhaust cutout did you use and how has it been working so far?



I used dmh for the cutout. Cut the resonator and moved it back 4 inches and then installed in front of it. I wanted as loud as could be open and as quiet closed.
It works fantastic, so glad i don't have to hold that button down let alone drilling a hole or running wires through the firewall.
https://youtu.be/TXlkrtq6wZw
For timing the switch there is a video but it can be confusing because he just uses buttons here is that video https://www.youtube.com/shared?ci=8ZAVDr-QilE
I was thinking of making a post... Redoing the schematic so its legible and redoing that video how to do the timers
I think i can do it next week.
Overall its pretty easy to do


Sent from my iPhone using Tapatalk Pro
 

aschiller98

Active Member
Joined
May 25, 2016
Posts
58
Reaction score
22
I used dmh for the cutout. Cut the resonator and moved it back 4 inches and then installed in front of it. I wanted as loud as could be open and as quiet closed.
It works fantastic, so glad i don't have to hold that button down let alone drilling a hole or running wires through the firewall.
https://youtu.be/TXlkrtq6wZw
For timing the switch there is a video but it can be confusing because he just uses buttons here is that video https://www.youtube.com/shared?ci=8ZAVDr-QilE
I was thinking of making a post... Redoing the schematic so its legible and redoing that video how to do the timers
I think i can do it next week.
Overall its pretty easy to do


Sent from my iPhone using Tapatalk Pro

A writeup would be super helpful.
 
Top