Custom cnc machined center caps for method wheels

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

vince7870

Full Access Member
Joined
Dec 1, 2012
Posts
696
Reaction score
446
Location
long island NY
Ok guys I posted some pics of some custom center caps I had machined for my method nv wheels. A lot of guys responded with interest in having me get them a set. They are machined out of 6061 aluminum and machined to fit the method wheels with no movement whatsoever. The taper duplicates the taper of wheel and uses a high temp high pressure oring which causes enough pressure to take up any slack and create a tight fit.

Sorry it took so long but I wanted the fit and finish to be perfect.

These caps will fit any method wheels with a bore of 94 mm and rim thickness of 30.5 mm. They will fit snug and be as flush as possible.

The caps could be anno'd black red blue or left raw machined to match the machined method wheels.

The engraving could be done within reason to whatever you desire.

I am currently working on having a set made up with my avatar engraved in the face.

Here are a few pics.

The cost is $200 plus $20 for a set shipped to lower 48 states. If they need to be shipped out of the country please contact me and we'll figure out what it costs.

You can always pm here on the forum or you can email me at [email protected]

If you guy are interested the first batch of 10 sets is being made.
-3271-4C38-AC05-F39717651D7A-1508-000000D5701CB9E0.jpg

-AB69-4CC7-8466-B2D07726ABCE-4997-000002A9E6DC32E3.jpg

7-6ED0-4C91-8515-FA8615A4F02A-407-0000002A85D0B610.jpg

6-B4DD-49B2-A9D4-9A61D9392BE9-407-00000028FD71E5C9.jpg

-0B93-4424-860A-EA28AC2109BE-4997-000002A9DA4CCBBC.jpg

Thanks birdman!
 
Last edited:

BIRDMAN

Birdministrator
Joined
May 16, 2010
Posts
12,915
Reaction score
6,191
Location
Boston
approved, but use the IMG code from Photobucket, not the HTML code.
 
OP
OP
vince7870

vince7870

Full Access Member
Joined
Dec 1, 2012
Posts
696
Reaction score
446
Location
long island NY
so would these work on he method double standards?

Hi nick. i believe all methods have a 94 mm opening so the only measurement you would have to check is wheelface thickness. if it is around 30.5 mm they will sit flush.

KHC dave i believe has standards and measured his and they are on point.
 

Dubless

Full Access Member
Joined
Nov 29, 2012
Posts
65
Reaction score
16
Can't wait, will u build to order or wait till you get the all 10 orders before you start. Either way I'm in for a set of ano black with no engraving.

PM sent!
 

Dubless

Full Access Member
Joined
Nov 29, 2012
Posts
65
Reaction score
16
Payment sent, anybody in the market for near new stock NV center caps LOL!

Thanks again bud!
 
Status
Not open for further replies.
Top