Recent content by Matts6foot8

We're you able to retain navigation?

I'll answer my own. I did not realize that the truck in stock form was halogen which would mean noor less voltage to the low beam wire when the high beam is engaged. I ended up just running a relay and it works great.

I have a 2010 and the previous owner had hid's installed which the ballasts were failing and I removed. I installed the projectors that have the led chip built in. I'm sorry I don't know the official name of that style, bi-led? Anyways the oem headlamp socket is a 3 wire. So when I check for...

I just had one explode barely missing my head. Shops covered in oil. I thought I had it depressurized. Heard it release and everything. Even put the needle in double checking but it fooled me. These shocks don't last long enough for all this hassle. Btw when they do explode it's seriously like a...

Thank you for helping

Thank you for the info. Do you know if there is a sleeve or housing around the uni-ball that would need replaced also? I'm assuming these press in just like regular ball joints correct?

2010 6.2 150,000 miles 2nd owner Does anyone recognize this upper control arm? I'm trying to figure out the manufacturer. I know the lower control arms are stock but I cannot find any markings on the uppers. I'm assuming these were installed by the previous owner along with other suspension...

I'm sorry I did replace the plugs and wires 40,000 miles ago when I first got the truck. Truck has 140,000 mi now. Original coils are still on the truck. I'm assuming 140,000 mi is a lot for a set of coils and I have no idea how it was driven before I purchased it but the body is flawless I have...

Stock everything. Does have a 5star tune on daily driver.

So I was changing out spark plugs and coil boots after about 40,000 miles and the plugs had normal wear. What concerns me is while I was changing out the boots and coil wire a few of the resistor "pellets" would not drop out of the coil. Some were corroded in and after further research some of...

So I'm not familiar with forum rules. Do I need to start a new thread for different topic questions or does it matter?

Here is a picture of the mount/cross member. I'm thinking the previous owner got a package deal with them together.

Here's another

Okay so the shaft is 1 3/4 wide. I measured the shaft that is exposed for the amount of travel and it measures 2 1/2 inches. The bump stop total width is 2 1/2 inches.

Now that looks correct. On mine I think the cross member/sleeve that holds the stops is too low like you said.